
The iFlight BLITZ Mini E55 is a 4-in-1 ESC for 2S to 6S mini FPV drones. It has a G071 MCU, a built-in current sensor, BLHeli32 firmware and supports DShot150, DShot300 and DShot600 as well as MultiShot and OneShot. It mounts on a 20 x 20 mm pattern with 4 mm holes.
Specifications
- Input voltage: 2S to 6S
- Max. continuous current: 55 A
- MCU: G071
- BEC: none
- Firmware: BLHeli32
- Firmware target: IFLIGHT_BLITZ_G071_01 32.9
- Current sensor: yes
- Telemetry: supported
- Protocol: DShot150 / 300 / 600, MultiShot, OneShot
- Mounting: 20 x 20 mm, 4 mm holes
- Dimensions: 35 x 42 mm
- Weight: 11.3 g
Package contents (as listed by iFlight)
- 1 x BLITZ Mini E55 4-IN-1 2-6S ESC
- 1 x power cables and ESC signal wires
Specifications come from the iFlight product page. The wiring diagram in the product images is an illustration from the iFlight instruction sheet, which is also linked below. The motors and the battery connector shown in it are not included in the package. iFlight notes that if you use this ESC in the iH3 O3 frame kit, you should remove the capacitor before installing it. Check the wiring before you connect a battery.