
The iFlight BLITZ H7 Pro is a 35 x 35 mm flight controller for FPV drones. It uses an STM32H743 processor and an ICM42688 gyro, has a built-in OSD chip (AT7456E), an SD card for blackbox logging, and supports input from 4S to 12S LiPo. It has a removable expansion pad board for extra peripherals.
Specifications
- MCU: STM32H743
- Gyro: ICM42688
- Barometer: DPS310
- OSD: AT7456E
- Input voltage: 14.8 V to 50.4 V (4S to 12S LiPo)
- Blackbox: SD card
- UARTs: 7
- Outputs: 8 x DShot/PWM
- I2C: 2 x I2C for GPS / magnetometer
- VTX protocol: SmartAudio and IRC Tramp supported
- LED controller: yes
- Beeper pad: yes
- Mounting: 35 x 35 mm, 4 mm holes
- Dimensions: 42 x 42 x 11.3 mm
- Weight: 20 g
- Firmware target: IFLIGHT_BLITZ_H7_PRO (Betaflight and INAV); ArduPilot target: BlitzH743Pro
Wiring suggestion (from iFlight)
- UART 1: HD or analog VTX
- UART 2: receiver
- UART 4: GPS
- UART 5: ESC telemetry
Package contents (as listed by iFlight)
- 1 x BLITZ H7 Pro flight controller
- 1 x cable set
- 1 x USB adapter board
Specifications come from the iFlight product page. The first part of the iFlight wiring diagram is in the product images. The full iFlight instruction sheet, with the ESC and extra wiring, is linked below. Check it before you connect a battery.