
The HGLRC Zeus Nano is a compact 5.8GHz analog video transmitter for FPV builds with a regulated 5V supply. Its small board, built-in microphone and multiple mounting patterns suit installations where space and weight matter.
This is the 350mW Zeus Nano version. It is not the Zeus 800mW or Zeus VTX Pro 1.6W. Use it with a compatible analog FPV camera and matching analog receiver or goggles. It does not transmit DJI digital video.
Features
- Selectable PIT, 25mW, 100mW, 200mW and 350mW power settings.
- IRC Tramp control for supported flight-controller setups.
- Built-in microphone for an audio-capable analog video system.
- IPEX antenna connection, with a linear antenna and IPEX-to-SMA adapter cable included.
- Mounting patterns for 16 x 16mm, 20 x 20mm and 25.5 x 25.5mm installations.
Specifications
- Model: HGLRC Zeus Nano VTX 350mW
- Video system: 5.8GHz analog FPV
- Supply: regulated DC 5V, following HGLRC's product specification
- Manufacturer-listed power modes: PIT / 25 / 100 / 200 / 350mW
- Typical listed current: PIT 75mA; 25mW 180mA; 100mW 280mA; 200mW 330mA; 350mW 400mA
- Channel table: 40 positions across A/B/E/F/R groups
- Control protocol: IRC Tramp
- Antenna connector: IPEX
- Mounting: 16 x 16mm and 25.5 x 25.5mm M2; 20 x 20mm M3
- Board dimensions: approximately 18.6 x 13.6 x 6mm
- Board weight: approximately 2.4g
Installation and Use
Connect the correct antenna before applying power. Check the 5V, ground, video and control pad labels against the official wiring diagram and your flight controller. Do not connect battery voltage directly or assume another manufacturer's cable has the same pin order. Configure IRC Tramp only on a supported controller connection.
Provide cooling airflow and choose an allowed channel and power setting for your location. The full manufacturer channel table is not a statement that every listed frequency or power level is permitted for use locally. FPV performance depends on the antenna, receiver, installation and surroundings.
Package Includes
- 1 x HGLRC Zeus Nano 350mW VTX.
- 1 x IPEX linear brass antenna.
- 1 x IPEX-to-SMA adapter cable.
- 6 x VTX cables.
Flight controller, FPV camera, goggles or video receiver, drone frame, motors, ESC, battery and other installation electronics are not included. A controller shown in the wiring illustration is an installation example, not a package item.