
The HGLRC Rekon7 Pro is a 7-inch carbon-fiber frame kit for custom long-range FPV builds. It uses a 324mm wheelbase, replaceable 6mm arms and separate arm reinforcement bars. The low-profile frame includes printed mounts for a flight camera, GPS, antennas and compatible digital video hardware.
Key features
- Original Rekon7 Pro frame kit, not the Rekon7 Pro V2.
- 3K carbon-fiber structure with 2mm top, middle and bottom plates.
- 6mm front and rear arms, with 4mm reinforcement bars.
- 324mm wheelbase and approximately 337 x 246mm footprint.
- 20 x 20mm flight-controller mounting; 16 x 16mm and 19 x 19mm motor mounting patterns.
- Camera mounting supports 19 x 19mm and 20 x 20mm formats. Printed DJI O3 and original DJI Air Unit mounting parts are included.
- Assembly is required. Electronics and propulsion parts must be selected separately.
Package contents
- 1 each: 2mm top plate, base plate and middle plate.
- 2 each: 6mm front arms, 6mm rear arms, 2mm protection plates, 2mm camera side plates and 4mm arm reinforcement bars.
- Aluminum standoffs: 2 x M3 x 28mm, 4 x M3 x 20mm and 2 x M3 x 18mm.
- Screws: 4 x M4 x 12; 4 each M3 x 20, M3 x 16 and M3 x 10; 8 x M3 x 8; 4 x M2 x 20; 1 each M2 x 16 and M2 x 10; 2 x M2 x 4.
- 1 red M5 lock nut, 4 M3 lock nuts and 5 M2 lock nuts.
- 8 x M3 x 8mm and 4 x M2 x 4mm vibration-damping balls.
- 2 x 20 x 250mm battery straps and 1 battery anti-slip pad.
- Printed mounts: action camera, GPS, antenna, T-antenna, buzzer, DJI Air Unit blocks A and B, DJI O3 holder and camera conversion seat.
Frame kit only. Motors, propellers, flight controller, ESC, receiver, GPS electronics, FPV camera, video transmitter, action camera and battery are not included. Assembly photos illustrate the frame structure and mounting sequence, not a ready-to-fly drone. Flight time, payload and range depend on the finished build.