- Model No: GA12 N20
- Motor Type: Center Shaft DC Geared Motor
- Base Motor: 30000 RPM
- RPM: 1000
- Gear Ratio: 30
- Rated Voltage: 12V DC
- No Load Current: 0.06 mA
- Stall Current: 0.75 A
- Rated Torque: 0.1 Kgcm
- Stall Torque: 0.5 Kgcm
- Shaft Type: D-type Single Side
- Shaft Diameter (mm): 3mm
- Shaft Length (mm): 9mm
Description :
This N20 12v 1000 RPM Metal Gear Micro DC Motor with Precious Metal Brush is a light weight high torque motor suitable for a variety of industrial, home appliances and hobby applications as well. This motor is equipped with an all metal gearbox assembly which provides an amazing torque for this size of the motor. Also the brushes used in the motor provided by Robokits are precious metal brushes and not carbon brushes. This ensures a higher working life of the motor compared with the motor with carbon brushes.
As compared to other motors in this size either with metal or plastic gears, the N20 all metal geared motor has a much higher torque to size ratio. The BO motor series 1 and series 2 and the center shaft 12 V motors available in the market are widely used for small industrial applications or robotic projects. However, when comparing the torque, sturdiness, reliability and working life, the N20 motor beats all the other motors by a huge margin. The specifications mentioned below are a testament to the same.
The N20 motor is ideal for small IIOT ( Industrial IOT) products like electric lock, webcam pan tilt and other similar actuator products which need good torque in limited space and in less weight. For the hobby segment products like robotic cars, micromouse, electric boat and all small motor related projects, where power consumption is a concern along with optimal pricing, the N20 all metal gear motor is a perfect fit.
The N20 all metal gear micro dc motor is also available with an encoder which can help to accurately control the position of the motor. Please check out the N20 motor with encoder section for the same.
Specifications:
- Model No: GA12 N20
- Motor Type: Center Shaft DC Geared Motor
- Base Motor: 30000 RPM
- RPM: 1000
- Gear Ratio: 30
- Rated Voltage: 12V DC
- No Load Current: 0.06 mA
- Stall Current: 0.75 A
- Rated Torque: 0.1 Kgcm
- Stall Torque: 0.5 Kgcm
- Shaft Type: D-type Single Side
- Shaft Diameter (mm): 3mm
- Shaft Length (mm): 9mm
Package Included :
1 X N20 12v 1000 RPM Metal Gear Micro DC Motor
