Description:
This is DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit. This DSO138 digital oscilloscope kit adopts an ARM Cortex-M3 processor and a 2.4-inch TFT screen. It’s easy and reliable for circuit operation. It can display frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values. This boost converter is a great match for the DSO138 oscilloscope kit. It can be connected directly to the DSO138 motherboard(not included), making the DSO138 oscilloscope to be a portable oscilloscope for better use.
Specification:
- Power Input: DC 9V(Power adapter is not included)
- Maximum Real-Time Sampling Rate : 1Msps
- Accuracy: 12Bit
- Sampling Buffer Depth: 1024 bytes
- Analog Bandwidth: 0 - 200KHz
- Vertical Sensitivity: 10mV / Div - 5V / Div ( 1-2-5 progressive manner)
- Input Impedance: 1MΩ
- Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
- The Horizontal Time Base Range: 10μs / Div - 50s / Div (1-2-5 progressive manner)
Features:
- STM32F103C8 Microcontroller: The DSO138 Oscilloscope Kit Uses ARM Cortex-M3 Processor, and Includes a 2.4" Color TFT Display Screen, which Can be Used as ARM Test Development Board.
- Various Digital Waveform Display: Including Frequency, Cycle, Pulse Width, Max/Min, Average, Peak Value and Effective Value, Can be Triggered by Rising or Falling Edges, Perfect for Arduino etc.
- HOLD Function: With Automatic, Conventional and Single Trigger Mode Can Freeze at Any Time Waveform Display.
- Fully Assembled and Soldered Professionally: Has been Soldered All the SMD, Including the Acrylic Case Kits, Need to be Installed by Yourself.
- Adjustable Vertical Displacement, and with Instructions, which Increase the Likelihood of Adding Different Features or Developing New Applications on the Hardware for Users.
- Coupling modes include DC / AC / GND.
- With automatic, regular and one-shot mode, easy to capture the moment waveform.
- Available rising or falling edge trigger.
- Adjustable trigger level position, and with instructions.
- Observable trigger waveform before ( negative delay).
- Can freeze at any time waveform display (HOLD function).
- Comes 1Hz /3.3V square wave test signal source.
Package Included:
- 1 x DSO138 Digital Oscilloscope
- 1 x Acrylic Cell
