
The Foxeer M10Q 120 is a small GPS module with a built-in QMC5883 compass, based on the M10 generation GNSS chip. It outputs NMEA or UBLOX data and works with flight controllers that have a spare UART and I2C (SCL and SDA) pins.
Key features
- M10 (10th generation) GNSS chip with 72 channels.
- GPS, GLONASS, BDS, Galileo, SBAS and QZSS support.
- QMC5883 compass on the same board.
- Dual protocol output: NMEA and UBLOX.
- PPS LED: constant on after power up, flickering once positioning is achieved.
Specifications
- Model: M10Q-120
- Input voltage: 5V
- Antenna: ceramic antenna
- Built-in battery
- Baud rate: 115200 bps
- Output frequency: 1Hz to 10Hz, 10Hz default
- Speed accuracy: 0.05 m/s
- Horizontal positioning accuracy: 2D ACC 1.5 m (outdoor)
- Receiver sensitivity: tracking -166 dBm, capture -160 dBm
- Dynamic limits: height 50000 m, speed 500 m/s, acceleration 4G
- Operating temperature: -40 to +85 C
- Storage temperature: -40 to +105 C
- Compass orientation: plug facing the direction of flight with the antenna up. For Betaflight, use CW 180 degree flip.
- Size: 12.5 x 17 x 5 mm
- Weight: 2.7 g
Package contents
- 1 x Foxeer M10Q 120 GPS 5883 Compass module
Flight controller, cable and mounting parts are not included. The connection picture is an illustration only. Supplier note: although this is a Foxeer product, the Foxeer name may not be printed on every unit received. Specifications follow the Foxeer product sheet. The 120 in the model name is a model number, not a data rate.