
The F330 is a 330mm glass fiber mini quadcopter frame kit with an integrated PCB, a good starting point for a first quadcopter build. The main plates are glass fiber and the four arms are molded polyamide nylon, two red and two white so you can tell front from back. This is an unpowered frame kit that requires assembly, not a complete drone.
Key features
- 330mm wheelbase, about 48mm tall, arm size 155 x 34mm (L x W).
- Glass fiber top and bottom plates with an integrated PCB, so you can solder ESC power leads directly and skip a separate power distribution board.
- Polyamide nylon arms with support ridges, colored 2 red and 2 white for orientation.
- Pre-threaded brass sleeves for the arm bolts, one bolt size for the build and a single hex wrench size.
- Motor mount holes 16mm and 19mm spacing; mounting tabs at the front and rear of the bottom plate for a camera or other accessories.
- Weight about 160g as listed by the supplier (other suppliers list 143g to 170g, without electronics).
Package contents
As listed by a supplier of this frame: 1 x F330 quadcopter frame (top and bottom plate) with integrated PCB, 4 x F330 arms (2 red and 2 white) and 2 x accessory sets.
Not included: motors, propellers, ESCs, flight controller, receiver, battery, camera, VTX, landing gear and assembly tools. Photos show the bare frame kit only; no electronics are part of this kit. Assembly is required.