
eSUN TPU-95A Clear Filament, 1.75mm, 1kg
Make flexible parts with this 1kg spool of eSUN TPU-95A in Clear. This is a 1.75mm thermoplastic polyurethane filament for a compatible FDM printer. Its Shore hardness is 95A, giving a different feel and printing behaviour from rigid PLA, PETG or ABS. The Clear colour is translucent: layer lines, wall thickness, infill and surface texture affect how much light a finished print lets through. It should not be treated as an optically transparent replacement for glass.
Choose flexibility to suit the part
TPU-95A combines flexibility with resistance to tearing and wear. It can be useful for experimental cushioning parts, flexible covers, model tyres and other prototypes that need to bend rather than remain rigid. Printed flexibility depends on the design as well as the material: a thin wall or open infill responds differently from a thick, solid section. Print a small sample in the intended orientation before deciding whether a design has the required stiffness and rebound.
The supporting gallery shows the manufacturer's TPU-95A application examples in several colours. These pictures illustrate possible designs, not the Clear colour supplied in this listing. Printed examples, shoes, balls and other accessories are not included. Appearance and performance depend on the printer, settings and part design; this spool is not a certification for protective equipment, medical devices or load-bearing use.
Prepare the filament path
A short, well-supported filament path helps soft filament feed reliably. eSUN recommends a direct-drive extruder and slower printing with flexible materials. Excessive feed pressure can deform the filament around the drive gears, so begin conservatively and check that the spool turns freely. A Bowden arrangement can be more demanding and may need a much slower feed rate. Do not assume that every printer set up for PLA can process flexible material without adjustment.
The current manufacturer guide gives a nozzle reference of 220-250°C, a bed reference of 45-60°C and 100% fan speed. Use these as starting points rather than a guaranteed profile. Check the temperature limits of the hotend and build surface, then tune flow, retraction and speed using small tests. Overhangs and bridges may need support because flexible filament can be harder to cool and hold in place.
Keep the material dry
TPU absorbs moisture, which can affect extrusion and surface quality. Keep unused filament sealed with desiccant and protect the spool from dust. If drying is needed, follow the instructions supplied with the spool and the dryer, including temperature and spool limits. Keep the workspace ventilated, avoid touching hot printer parts and allow the bed and model to cool before removal.
Specifications
| Brand | eSUN |
|---|---|
| Material | TPU-95A, thermoplastic polyurethane |
| Colour | Clear / translucent |
| Nominal diameter | 1.75mm |
| Net filament weight | 1kg |
| Shore hardness | 95A |
| Supply format | Wound spool |
| Nozzle reference | 220-250°C |
| Bed reference | 45-60°C |
| Fan reference | 100% |
| Extruder recommendation | Direct drive, slower printing |
| Package contents | 1 x 1kg spool of eSUN TPU-95A Clear filament |
Useful Links
- eSUN TPU-95A technical data sheet: nozzle, bed, fan and feed settings (PDF)
- eSUN flexible-TPU printing and direct-drive setup guide
- eSUN TPU-95A official material settings and downloads
The flexible-material guide covers several TPU grades. Use the TPU-95A data sheet and supplied spool label for this filament. The grade-specific references give 55°C for more than 4 hours of drying, while the general guide gives 60°C for more than 8 hours after long storage. Do not combine those into a universal setting; follow the applicable spool instructions and the dryer and reel temperature limits.