
eSUN PETG Translucent Orange Filament, 1.75mm, 1kg
Add a bright, light-transmitting orange finish to your next FDM project with this 1kg spool of eSUN PETG. The filament diameter is 1.75mm, suitable for printers designed to feed that size and operate at PETG temperatures. This is the Translucent Orange shade, not opaque Solid Orange, PLA, resin or a spool-free refill. It is useful when the colour and surface finish are part of the design as well as the shape.
Colour with a translucent finish
The orange tint allows some light through a printed wall. It should not be treated as optically clear glass: layer lines, wall thickness, infill and the model's shape all affect the result. Thin sections can look brighter and more transparent, while thick sections appear denser. Print a small sample at your intended wall thickness before committing to a display piece or a matching set of parts.
PETG is glycol-modified polyethylene terephthalate. eSUN positions this material as a practical balance of toughness, layer bonding and ease of printing. It suits prototypes, desktop organisers, decorative housings and other non-critical everyday parts. The finished part's strength still depends on its geometry, print orientation, walls and infill. Do not assume a decorative print is suitable for lifting, pressure containment, food contact or safety-critical use.
Printer setup
Start with a PETG profile for your printer, then follow the guidance on the supplied spool. eSUN's current general PETG reference uses a 240-260°C nozzle and a 75-90°C heated bed. These are tuning references, not a guarantee that every production batch, printer or build surface needs the same settings. Keep within your hotend's temperature rating and test first-layer adhesion before starting a long print.
Adjust temperature, retraction, travel and cooling if you see stringing or uneven extrusion. PETG can grip some build surfaces strongly, so follow the plate maker's advice about release layers and let the plate cool before removing a model. Keep the loose filament end secured between uses to help prevent a tangled unwind.
Storage and care
Store the spool sealed with dry desiccant when it is not in use. A water-resistant printed object does not mean filament can be left exposed indefinitely. If moisture affects extrusion, use the drying guidance for the supplied material and equipment. Print in a ventilated area and keep hands away from the heated nozzle and bed.
Specifications
| Brand / material | eSUN / PETG |
|---|---|
| Colour | Translucent Orange |
| Filament diameter | 1.75mm |
| Net filament weight | 1kg |
| Format | Wound spool |
| Nozzle reference | 240-260°C, check supplied spool guidance |
| Bed reference | 75-90°C, matched to build surface |
| Package contents | 1 x 1kg Translucent Orange PETG filament spool |
The supplier notes a PETG+/PETG name update, so packaging may use either name. Spool construction can vary by batch. Gallery application photos illustrate the PETG family; printers, finished models, accessories and extra spools shown are not included.