
eSUN PC-HT White: heat-resistant polycarbonate for functional printing
This 1.75mm eSUN PC-HT filament supplies 1kg of White material on a spool. It is intended for FDM printing of technical parts where ordinary display-model materials may not provide enough heat resistance or mechanical performance. PC-HT builds on the toughness of polycarbonate while improving layer bonding and printing stability. The white finish suits prototypes and functional housings where a light-coloured surface is preferred.
Build parts for demanding conditions
PC-HT is designed for applications such as electronics housings, machine components and engineering prototypes. eSUN reports a heat distortion temperature of 113.6°C under its laboratory test conditions. This is a material test value, not a guaranteed continuous service temperature for every printed part. Geometry, wall thickness, print orientation, load and exposure time all affect performance, so test the finished component in its intended environment before putting it into service.
The material combines strength with impact resistance and improved bonding between deposited layers. It also aims to reduce warping and stringing compared with standard PC. That can help when printing precise mating surfaces and functional details, but careful calibration is still necessary. The manufacturer application photos show example parts in other colours; they illustrate possible uses of PC-HT and do not change the White colour supplied with this listing.
Printer setup and handling
Use a printer that can safely maintain the recommended 290-300°C nozzle temperature and 100-110°C bed temperature. A heated bed and enclosed printing chamber are recommended by eSUN. Confirm the hotend, build surface and enclosure are rated for these conditions before starting. Keep the printer in a ventilated working area and follow its safety instructions. This is a technical filament, not a drop-in substitute for low-temperature PLA profiles.
Dry PC-HT before printing, following the current spool label and applicable eSUN technical data sheet. Published drying guidance differs between eSUN references, so confirm the profile for the supplied spool before heating. Only use a dryer and spool rated for those conditions. Use low part cooling. Keep unused filament sealed and dry. Begin with a small calibration print, then adjust flow, retraction, bed adhesion and speed for the printer and part. The published speed ceiling is a starting limit rather than a promise of equal results on every machine. Printed parts are not automatically certified for medical, food-contact or safety-critical use.
Specifications
Brand / material : eSUN / PC-HT polycarbonate-based filament
Colour : White
Filament diameter : 1.75mm
Net filament weight : 1kg on spool
Nozzle temperature : 290-300°C
Bed temperature : 100-110°C
Fan speed : 0-20%
Printing speed : Below 200mm/s
Drying guidance : Follow the current spool label and applicable manufacturer TDS; check dryer and spool temperature ratings
Heat distortion temperature : 113.6°C, manufacturer laboratory value
Package includes : 1 x 1kg spool of eSUN PC-HT White filament
Useful Links
- eSUN PC-HT technical data sheet (PDF)
- eSUN PC printing and setup guide (includes PC-HT)
- eSUN PC-HT official print settings and downloads
The PC guide covers the material family and includes PC-HT. Check the supplied spool label and applicable technical data sheet before setting drying temperatures, since published eSUN references differ. Example models shown in guides are not included.