
eSUN PA-CF combines a nylon 6/66 copolymer with 20% carbon fibre to make a stiff engineering filament for functional 3D printing. This listing is for one 1kg spool of 1.75mm filament with a black, matte appearance. Some manufacturer packaging calls this uncoloured carbon-fibre formulation "Natural"; it is the dark PA-CF material shown here, not the pale Natural colour of unfilled nylon.
Carbon-fibre reinforcement helps increase rigidity and supports parts that need to hold their shape under working loads. The material's wear behaviour makes it useful for trial gears, brackets, fixtures and other mechanical prototypes. Low shrinkage can help with dimensional control, but careful design, drying and printer setup are still needed. Print a test piece and measure the result before making a full set of mating parts.
PA-CF is a specialist material rather than a direct replacement for everyday PLA. It can be less tolerant of tight bends in the feed path, and its abrasive fibres wear ordinary soft brass nozzles and extruder components. The manufacturer recommends hardened steel or ruby nozzles and, where possible, hardened drive gears. Check your printer's material guidance, hotend rating and recommended nozzle diameter before use. Keep the filament route smooth and avoid forcing the strand around sharp corners.
Printing and storage
The manufacturer's technical data sheet gives a starting nozzle range of 260-300°C, a bed range of 45-60°C and 0% part cooling. Its reference speed range is 40-100mm/s. These values are starting points rather than guaranteed settings: follow the current spool instructions and tune adhesion, extrusion and speed for your printer, nozzle and geometry. Use suitable ventilation for high-temperature polymer printing. Low odour is not a safety rating.
Dry the filament at 70°C for more than 12 hours before printing, following the manufacturer's notes and the reel's temperature limit. A controlled filament dryer is preferable to an unregulated heat source. Keep unused material sealed with desiccant, and consider feeding from a dry box during long prints. Moisture can reduce surface quality and consistency even when the spool looks normal.
Specifications
Brand: eSUN.
Material family: PA-CF, also called ePA-CF.
Base polymer: nylon 6/66 copolymer.
Carbon-fibre content: 20%.
Appearance: Black / Natural carbon-fibre colour, matte.
Filament diameter: 1.75mm.
Net filament weight: 1kg.
Nozzle starting range: 260-300°C.
Bed starting range: 45-60°C.
Cooling-fan starting setting: 0%.
Reference printing speed: 40-100mm/s.
Package contents: one PA-CF filament spool; printed demonstration parts are not included.
Images may show different reel designs and example prints. Marketing illustrations are not guarantees of clog-free printing or application approval. Validate the finished part's strength, heat performance and service life for its intended use. No food-contact, medical, electrical-insulation or safety-critical certification is implied.
Useful Links
- eSUN PA-CF official printing settings, hardened-nozzle guidance and downloads
- eSUN nylon drying, enclosure and printer-setup guide
The nylon guide covers multiple grades. Use the PA-CF product page and current spool label for this carbon-fibre nylon, including its hardened-nozzle and dry-storage guidance. PA6-CF and PA12-CF are different formulations and their settings should not be substituted.