
Elecrow CrowPanel Advance 3.5-inch ESP32-S3 Touch Display
Build a compact control panel around a 480 × 320 IPS capacitive touchscreen and an ESP32-S3 controller. This CrowPanel Advance display combines the screen, processor, memory and peripheral connections on one board for custom dashboards, device controls and connected prototypes.
Features
- 3.5-inch IPS display with 480 × 320 resolution, ILI9488 driver and single-point capacitive touch.
- ESP32-S3-WROOM-1-N16R8 module with a dual-core processor up to 240 MHz, 16 MB flash and 8 MB PSRAM.
- Onboard 2.4 GHz Wi-Fi (802.11b/g/n) and Bluetooth Low Energy connectivity.
- USB-C, UART and I2C connections, microSD slot, microphone, speaker output and battery connector.
- Real-time clock, audio amplifier and battery charging support for suitable project designs.
- Develop with Arduino IDE, ESP-IDF or PlatformIO, with LVGL available for your touch interface.
Specifications
| Brand / model | Elecrow CrowPanel Advance 3.5, DIS01835A |
|---|---|
| Processor | ESP32-S3-WROOM-1-N16R8, dual-core Xtensa LX7, up to 240 MHz |
| Memory | 16 MB flash, 8 MB PSRAM, 512 KB SRAM |
| Display | 3.5-inch IPS, 480 × 320 pixels, ILI9488 |
| Touch | Single-point capacitive |
| Viewing angle / brightness | 178° / 400 cd/m² typical |
| Wireless | 2.4 GHz Wi-Fi and Bluetooth LE onboard; other protocols need optional modules |
| Power input | 5 V / 2 A through USB or the documented UART power terminal |
| Operating temperature | -20 to 70°C |
Before you build
- This is the standard display module, not a preconfigured Meshtastic device. No SX1262 LoRa module or Meshtastic firmware is included.
- ESP32-H2, ESP32-C6, nRF2401 and other replaceable wireless modules are optional, not included. Zigbee, Thread, Matter, Wi-Fi 6 and other expansion capabilities depend on the appropriate module and software.
- AI and voice assistant functions require compatible firmware, configuration and any services needed by your application. An AI service subscription or a ready-to-use assistant is not included.
- The manufacturer states that the microphone and SD card cannot be used simultaneously.
- Check the official pinout and manual before connecting external power, a battery, speakers or other hardware. Expansion and application pictures illustrate possibilities, not extra supplied parts.
Package includes
- 1 × Elecrow CrowPanel Advance 3.5-inch ESP32-S3 display module, without enclosure
- 1 × USB-A to USB-C cable
- 1 × Crowtail/Grove 4-pin DuPont cable
Not included: enclosure, optional wireless modules, battery, speaker, microSD card, sensors, or other application hardware.