
Elecrow CrowPanel 4.3-inch ESP32-S3 HMI Touch Display
Make a custom control panel with a 4.3-inch 480 × 272 TFT screen and an integrated ESP32-S3 controller. This CrowPanel Basic module uses resistive touch, so its supplied stylus can operate buttons, menus and other on-screen controls. The bare module is intended for mounting in your own project, without an acrylic case.
Features
- 4.3-inch TN TFT-LCD with 480 × 272 resolution and resistive touch.
- ESP32-S3-WROOM-1-N4R2 controller, up to 240 MHz, with 4 MB flash and 2 MB PSRAM.
- Built-in 2.4 GHz 802.11b/g/n Wi-Fi and Bluetooth Low Energy for connected projects.
- USB-C connection for programming and power, plus UART, GPIO, speaker and battery connections.
- TF/microSD card slot for compatible project storage.
- Use Arduino IDE, ESP-IDF or PlatformIO, with LVGL for graphical interfaces. Official examples and pinout links are below.
Specifications
| Brand / series | Elecrow CrowPanel Basic |
|---|---|
| Screen | 4.3-inch TN TFT-LCD, 480 × 272 pixels |
| Touch | Resistive touchscreen, stylus included |
| Processor module | ESP32-S3-WROOM-1-N4R2 |
| Processor speed | Up to 240 MHz |
| Flash / PSRAM | 4 MB / 2 MB |
| Wireless | 2.4 GHz Wi-Fi and Bluetooth LE |
| External power | DC 5 V, 2 A supply recommended by manufacturer |
| Battery interface | 3.7–4.2 V, compatible battery sold separately |
| Interfaces | USB-C, TF card slot, GPIO, UART, speaker and battery connections |
| Controls | BOOT and reset buttons |
| Operating temperature | -20 to 70°C |
Compatibility and setup
This is the 480 × 272 resistive-touch CrowPanel Basic display, not the 800 × 480 capacitive-touch CrowPanel Advance model. Match the official board revision and pinout before connecting peripherals. The manufacturer's documents show revision-dependent interface and display-driver details, so use the matching example for your board rather than assuming another CrowPanel's pin map.
Firmware, interface design and external sensors must be configured for your application. A computer, external speaker, battery, memory card, power adapter and sensors are not included. Application graphics illustrate example interfaces, not preloaded project guarantees or extra supplied hardware.
Package includes
- 1 × Elecrow CrowPanel 4.3-inch ESP32-S3 HMI resistive touch display module, without acrylic case
- 1 × USB-A to USB-C cable
- 1 × Crowtail/Grove to 4-pin DuPont cable
- 1 × Resistive touch stylus
Not included: acrylic enclosure, battery, speaker, microSD card, sensors or other application hardware.