
Elecrow CrowPanel 4.2-inch ESP32-S3 E-Paper HMI Display
Build a programmable sign, status panel or desk display with this CrowPanel module. A 4.2-inch black-and-white e-paper screen is paired with an ESP32-S3 controller and supplied in a white acrylic enclosure. The reflective screen uses ambient light rather than a backlight, and can retain its last image when power is removed.
Features
- 400 × 300-pixel monochrome e-paper panel with an anti-glare surface.
- ESP32-S3-WROOM-1-N8R8 module with up to 240 MHz processing, 8 MB flash and 8 MB PSRAM.
- Built-in Wi-Fi for connected display projects with suitable firmware.
- USB-C connection, TF/microSD slot, UART0, GPIO and battery interfaces.
- Menu, back, reset and BOOT buttons plus a rotary control for development and interaction.
- Supports partial refresh. Refresh speed and image quality depend on firmware and display settings.
Specifications
| Brand / series | Elecrow CrowPanel E-Paper |
|---|---|
| Manufacturer model | DIE07300S |
| Screen | 4.2-inch active-matrix electrophoretic display |
| Resolution / colours | 400 × 300 pixels, black and white |
| Active display area | 84.8 × 63.6 mm |
| Pixel pitch | 0.212 × 0.212 mm |
| Display driver | SSD1683 |
| Controller | ESP32-S3-WROOM-1-N8R8, up to 240 MHz |
| Memory | 8 MB flash and 8 MB PSRAM |
| Display communication | 3-/4-wire SPI |
| Battery connection | SH1.0, 2-pin; manufacturer lists 2.2–3.7 V battery input |
| Other interfaces | USB-C, UART0, GPIO and TF/microSD card slot |
| Enclosure | White acrylic |
| Operating temperature | 0 to 50°C |
| Storage temperature | -25 to 70°C |
Development and setup
Use the official wiki and board-specific examples to configure the ESP32-S3, pin assignments and display driver. Elecrow provides Arduino IDE guidance and also lists ESP-IDF and MicroPython as development options. This is a programmable development display, not a preconfigured office sign, touchscreen or video monitor. Example graphics in the photos illustrate possible applications, not supplied services or a guaranteed installed interface.
Follow the maker's wiring and battery instructions, check connector polarity and do not apply USB supply voltage directly to the battery connector. A battery, microSD card and external sensors are sold separately.
Package includes
- 1 × Elecrow CrowPanel 4.2-inch ESP32-S3 e-paper display with white acrylic enclosure
- 1 × USB cable
Not included: battery, microSD card, power adapter, sensors or computer. This listing is for one display, not a multi-display pack.