
Elecrow CrowPanel 2.8-inch ESP32 HMI Touch Display
Build a compact control panel with a 2.8-inch 320 × 240 TFT screen and an integrated ESP32-WROOM-32 controller. This CrowPanel Basic module has resistive touch for use with the supplied stylus. The bare display board comes without an acrylic enclosure, ready for a custom housing or prototype.
Features
- 2.8-inch TN TFT-LCD with 320 × 240 resolution and resistive touch.
- ESP32-WROOM-32-N4 processor module with a dual-core CPU running at up to 240 MHz.
- Built-in 2.4 GHz Wi-Fi and Bluetooth for connected projects.
- USB-C programming/power connection, microSD slot, GPIO, I2C, UART, speaker and battery interfaces.
- Supports Arduino IDE, ESP-IDF and PlatformIO development, with LVGL for graphical interfaces. Software and pin settings must match this board.
- BOOT and reset buttons for development and firmware loading.
Specifications
| Brand / series | Elecrow CrowPanel Basic |
|---|---|
| Manufacturer model | DIS04028H, without acrylic case |
| Display | 2.8-inch TN TFT-LCD, 320 × 240 pixels |
| Touch | Resistive touchscreen |
| Processor | ESP32-WROOM-32-N4, up to 240 MHz |
| Display driver | ILI9341V |
| Wireless | 2.4 GHz Wi-Fi and Bluetooth |
| External power | DC 5 V, 2 A supply recommended by manufacturer |
| Battery interface | 3.7–4.2 V, compatible battery sold separately |
| Expansion | TF/microSD, I2C, GPIO, speaker, UART0 and UART1 |
| Controls | BOOT and reset buttons |
| Operating temperature | -20 to 70°C |
Compatibility and setup
This is the original ESP32-WROOM-32 CrowPanel Basic display, not an ESP32-S3 CrowPanel Advance model. It is a programmable development module, not a finished home-automation controller. Match your board revision and the official pinout before wiring sensors or uploading firmware.
Example screen graphics illustrate possible interfaces. A computer, power adapter, sensors, speaker, battery and memory card are not supplied. Wireless projects need suitable firmware and configuration. No preconfigured cryptocurrency software or mining performance is promised for this HMI module.
Package includes
- 1 × Elecrow CrowPanel 2.8-inch ESP32 HMI resistive touch display module, without acrylic case
- 1 × USB-A to USB-C cable
- 1 × Crowtail/Grove to 4-pin DuPont cable
- 1 × Resistive touch stylus
Not included: acrylic enclosure, battery, speaker, microSD card, sensors or power adapter.