
2.4-inch ESP32 touch display for HMI and NMMiner projects
This Elecrow module combines a 320 x 240 resistive-touch LCD, ESP32-WROOM-32-N4 controller and 2.4 GHz Wi-Fi on a compact yellow PCB. It is the miner/CYD-style version with clear acrylic protective plates, not the older red-PCB CrowPanel display. Use it to build a small control panel, connected status display or an educational solo-mining experiment.
This listing supplies one display, not the manufacturer's two-pack. Demo screens and application pictures illustrate possible projects. Optional coloured 3D-printed housings, other appliances, battery, speaker, memory card and external power adapter are not included.
Features
- 2.4-inch TN TFT LCD with ILI9341V driver and resistive touch input.
- ESP32-WROOM-32-N4 with dual-core LX6 CPU up to 240 MHz, Wi-Fi and Bluetooth connectivity.
- USB-C programming/power connection, BOOT and RESET buttons, TF card slot and expansion connectors.
- I2C, GPIO, UART and speaker connections for custom embedded projects.
- Supports development with Arduino IDE, ESP-IDF, PlatformIO, MicroPython and LVGL. Choose libraries and pin definitions for this hardware revision.
- NMMiner-compatible hardware for users who want to experiment with Bitcoin solo mining after firmware setup.
Before using mining firmware
This is a low-power ESP32 development display, not an ASIC miner or a promise of mining income. Hashrate shown in manufacturer demo images depends on firmware and settings; earnings and successful blocks are not guaranteed. Firmware flashing, Wi-Fi/pool configuration and any third-party software activation or licence may be required. A paid NMMiner licence is not included in this listing. Check the linked documentation before flashing, since flashing replaces the existing firmware.
Specifications
| Display | 2.4-inch TN TFT LCD, 320 x 240 pixels |
|---|---|
| Touch | Resistive touchscreen |
| Controller | ESP32-WROOM-32-N4, dual-core LX6 up to 240 MHz |
| LCD driver | ILI9341V |
| Wireless | 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth |
| External supply | 5 V DC, 2 A supply specification |
| Battery interface | 3.7-4.2 V, battery not included |
| Expansion | TF card slot, I2C, GPIO, speaker, UART0 and UART1 |
| Buttons | BOOT and RESET |
| Active area | 36.72 x 48.96 mm |
| Module dimensions | 51 x 78 mm |
| Net weight | 52 g per module |
Package Includes
- 1 x Elecrow 2.4-inch ESP32 Miner LCD display with clear acrylic protective plates
- 1 x USB-A to USB-C cable
- 1 x Crowtail/Grove to 4-pin Dupont cable
- 1 x resistive-touch stylus