
Build beginner electronic circuits with your micro:bit
The ELECFREAKS EF08180 Starter Kit gives learners a breadboard, micro:bit adapter and a selection of electronic components for hands-on coding experiments. Wire LEDs, switches and sensors, then use a separately supplied micro:bit to read inputs and control light, sound and movement.
This EF08180 kit does not include a micro:bit board. The project photographs show example connections with a separately purchased micro:bit, not extra package contents.
Features
- Solderless breadboard experiments with an edge-connector adapter for micro:bit.
- Explore LEDs, push buttons, a trimpot, photocell and temperature sensing.
- Try servo movement, a mini motor and fan, buzzer tones and RGB lighting.
- Fourteen official lessons cover basic circuits and micro:bit activities.
- Use the Microsoft MakeCode editor for block-based coding.
Specifications
| Brand | ELECFREAKS |
|---|---|
| Manufacturer model | EF08180 |
| Variant | Starter Kit, without micro:bit board |
| Build method | Solderless breadboard and jumper wires |
| Lesson library | 14 official activities |
| Required separately | BBC micro:bit, suitable computer and batteries for portable use |
Package Includes
- 1 x micro:bit breadboard adapter
- 1 x transparent breadboard
- 1 x transparent battery holder
- 1 x micro servo with supplied fittings
- 1 x temperature sensor
- 1 x photocell light sensor
- 1 x Micro USB cable
- 1 x jumper-wire bundle
- 1 x diffused RGB LED
- 5 x red LEDs
- 5 x blue LEDs
- 5 x yellow LEDs
- 5 x green LEDs
- 1 x 10k ohm trimpot
- 2 x momentary push-button switches
- 1 x self-locking switch
- 1 x mini speaker/buzzer
- 1 x strip of 100 ohm resistors
- 1 x strip of 10k ohm resistors
- 5 x crocodile-clip leads
- 1 x 5V mini motor
- 1 x fan blade
- 1 x transistor
- 2 x diodes
- 1 x rainbow RGB LED ring
- 1 x component storage box
- 1 x printed Starter Kit guide
Resistors are listed by the supplied strip and jumper wires by the supplied bundle, matching the manufacturer's quantity graphic. The servo includes the small fittings shown in the kit photograph. A micro:bit board, batteries, computer, USB power source and the green demonstration base shown in some lessons are not included. Component appearance and packing arrangement may vary.
Getting Started
Insert your micro:bit into the breadboard adapter and follow the official lesson wiring. Disconnect power before changing connections. Check LED polarity, resistor placement and motor wiring before powering a circuit. Small parts are intended for supervised learning.
Useful Links
- Official Starter Kit lessons
- Manufacturer introduction and parts graphic
- LED connections and programming
- Button activity
- Potentiometer activity
- Light-sensor activity
- Microsoft MakeCode editor
Availability
Pre-order item. Estimated shipping: 20-25 days.