
DFRobot FIT0860 Industrial USB Isolator
Place the FIT0860 between a computer and a compatible low-power USB peripheral when a project needs an isolated USB connection. It separates the upstream and downstream signal and power paths, helping reduce problems caused by ground-potential differences and electrical noise in development or control setups.
Know the limits before connecting
- Full-speed USB at 12 Mbps. USB 2.0 compatibility does not mean 480 Mbps high-speed operation. This is not the newer high-speed multi-rate model.
- Maximum isolated output power: 1 W. Check the peripheral power requirement before use. This is not a high-current charger or a power supply for a complete single-board-computer system.
- The manufacturer specifies 2500 V signal isolation and 1500 V power isolation. These are isolation ratings, not permission to connect mains voltage to a USB port or a guarantee against every surge.
- The isolator itself needs no driver. The attached USB peripheral may still require its own driver and must be compatible with full-speed operation.
Specifications
| Product reference | DFRobot FIT0860 Industrial USB Isolator |
|---|---|
| USB interface | USB 2.0 compatible; full-speed 12 Mbps |
| Signal isolation rating | 2500 V, manufacturer specification |
| Power isolation rating | 1500 V, manufacturer specification |
| Output power | Maximum 1 W |
| Connections | USB male input to host; USB female output to peripheral |
| Power / drivers | USB-powered; no separate isolator driver required |
| Operating temperature | -40 to 85°C |
| Operating humidity | 5–95% RH |
| Supported host systems | Windows, Linux and macOS, subject to peripheral compatibility |
Connection guide
- Check that your peripheral supports the 12 Mbps USB connection and stays within the 1 W isolated-output limit.
- Connect the isolator USB male plug to the host computer. Connect the compatible peripheral to the isolator USB female socket.
- Check device recognition in your operating system, install any peripheral-specific driver if needed, and test the intended data connection before deploying the setup.
- Do not use USB isolation as a substitute for a safe electrical design. Work involving hazardous voltages needs suitable equipment, procedures and qualified supervision.
This model is intended for USB debugging, low-power industrial USB peripherals and noise-sensitive development setups. Device compatibility depends on USB mode and power demand; not every USB device will work through a full-speed isolator. Manufacturer photos retain the actual product markings. Physical dimensions are not specified here because the available manufacturer text and dimension image disagree.
Package includes
- 1 × DFRobot FIT0860 Industrial USB Isolator
Computer, peripheral, extension cable and other example equipment are not included. The connection guide is an illustration of the signal path, not extra supplied hardware.