
DFRobot FIT0798 M.2 A+E Key Gigabit Ethernet Module
Add a wired RJ45 network connection to a compatible LattePanda Alpha or Delta through its M.2 A+E Key interface. The FIT0798 uses a Realtek RTL8111F controller and supports automatic negotiation at 10, 100 or 1000 Mbps. The assembly has an M.2 card connected by a ribbon cable to a separate RJ45 connector board, allowing the network socket to be positioned away from the host slot.
Compatibility check: Confirm that the host has the correct, electrically compatible M.2 A+E Key slot, available space and support for the RTL8111F controller. A matching-looking M.2 storage slot is not enough. This is the Gigabit FIT0798 model, not a B+M Key 2.5G or 5G Ethernet card. DFRobot's 2.5 Gb/s host-interface figure does not mean the RJ45 port supports 2.5GbE: the network port is rated up to 1000 Mbps.
Features and specifications
| Maker model | DFRobot FIT0798 |
|---|---|
| Host interface | NGFF / M.2 A+E Key |
| Ethernet controller | Realtek RTL8111F |
| Network connection | One RJ45 port |
| Network link rates | 10 / 100 / 1000 Mbps, auto-negotiated |
| Named host boards | LattePanda Alpha and Delta |
| Operating systems listed by maker | Windows 32/64-bit, Linux, FreeBSD and VMware ESXi; verify the driver for the intended version |
| Operating temperature | 0 to 55°C |
| Operating humidity | 10–90% RH, non-condensing |
| Power consumption | 1.2 W, maker specification |
Installation and first use
- Shut down the host and disconnect its power before fitting the card. Check the slot keying, clearance and ribbon-cable routing.
- Fit and secure the M.2 card using the host's appropriate mounting point, and mount the RJ45 connector board without straining the ribbon cable.
- Reconnect power, start the system and check that the RTL8111F network controller is detected. Confirm driver availability for the exact operating-system release before relying on it.
- Connect a suitable Ethernet cable to a router or switch. Check the negotiated link rate in the operating system.
The link rate depends on the network cable, router or switch port and the other equipment in the connection. A 1000 Mbps link is not a promise of that application transfer speed or internet speed. General operating-system support does not guarantee that every version includes a working driver.
Package Includes
- 1 × DFRobot FIT0798 M.2 A+E Key to Gigabit Ethernet module assembly, with ribbon-connected RJ45 board
LattePanda or other host computer, power supply, network cable and router/switch are not included. The product photos show the module assembly, not a complete computer.