
A compact ESP32-based gateway that bridges serial devices to modern IP networks. It turns legacy UART equipment into network-ready nodes over 10/100Mbps Ethernet, 2.4GHz WiFi or Bluetooth, with an optimized TCP/IP stack on board so you can add connectivity to embedded projects without writing network code.
Configuration is handled through a simple AT+ command set, and the module supports four working modes (TCP Server, TCP Client, UDP Server and UDP Client) with six transparent transmission modes, making it easy to link serial ports, WiFi, Ethernet and Bluetooth in flexible combinations. Typical uses include IoT gateways, smart agriculture data collection, industrial monitoring and retrofitting RS-based equipment into networked systems.
Features
- ESP32 series SoC with integrated 2.4GHz WiFi and Bluetooth dual-mode connectivity
- 10/100Mbps adaptive RJ45 Ethernet port for wired networking
- Four working modes: TCP Server, TCP Client, UDP Server and UDP Client
- WiFi Station, SoftAP, SoftAP+Station and P2P modes with WPA/WPA2/WPA2-Enterprise and WPS security
- Wide serial baud rate range from 80 to 5,000,000 bps
- IPv4 networking with static IP or DHCP (default); AT+ command configuration
- Remote OTA firmware upgrades and SDK available for secondary development
- Flexible 5V or 3.3V power supply with low average current draw
Specifications
- Design: ESP32 embedded serial-to-Ethernet module (WT32-ETH01)
- WiFi: 802.11 b/g/n/e/i, 2.4-2.5GHz, up to 150Mbps
- Bluetooth: v4.2 BR/EDR and BLE
- Ethernet: RJ45, 10/100Mbps, auto cross-over/direct detection
- Serial baud rate: 80 to 5,000,000 bps
- On-board Flash: 32Mbit
- Power supply: 5V or 3.3V (optional); average working current approx. 80mA; supply at least 500mA recommended
- Network protocols: IPv4, TCP/UDP; static IP or DHCP
- Encryption: AES/RSA/ECC/SHA
- Firmware: remote OTA upgrade via network
- Connector: half-pad / through-hole (optional)
Package Includes
- 1 x DFRobot ESP32 Embedded Serial to Ethernet Module (DFR0963)