- Timer Range: 0.1seconds ~ 9999 minutes can be set, cycles 0 ~ 999 times.
- Voltage detection and voltmeter display range: DC 0-99 .9 V Error: 0.1V.
- Operating Power: DC10~16V.
- Coil Voltage: DC 12V.
- Two set of conversion (normally open and normally closed).
DESCRIPTION
- Coil Voltage: DC 12V.
- Two set of conversion (normally open and normally closed).
- Contact load: 10A/277V AC or 10A/30V DC Contact resistance: ≤ 100mΩ (1A 6VDC).
- Mechanical durability: 10 millions.
- Electricity durability: > 100,000 (10A-250VAC).
- Operating Temperature: -40 ~ 85℃.
- Set display shut, the minimum current values are 7mA/12V (delay released).
- Each group of relay contacts to a common and normally open, normally closed, two sets of conversion.
- Dual voltage detection control relay, the detection voltage range: DC 0 ~ 99.9V, each channel can be set to detect movement of the voltage on the lower voltage value (DC 0 ~ 99.9V).
SPECIFICATION
- Digital LED display, set by three keys, simple, powerful, has reset function.
- High-performance microcontrollers, industrial-grade reliability, high process stability, low power, digital display can be automatically turned off , the minimum operating current at 7mA/12V, with reverse power protection , surge current shock.
- Dual time relay, timer range: 0.1 seconds ~ 9999 minutes adjustable, close/ release cycles is adjustable from 0 to 999 ( “0” means infinite loop ) , timer relays can be set to close first or release first.
- Dual relay can take turns running, after the end of timer relay A then timer relay B began to run, turn the cycle , can be triggered by high level or switch to start and forced stop (P-3 mode ).
- Dual relay which can be run independently, can be high or switch to trigger the start (P-4 mode) ; All parameter settings can be saved, the next time modes and parameters continue to the last running.