
The CUAV NEO 3 Pro combines a u-blox NEO-M9N GNSS receiver with a DroneCAN interface, RM3100 magnetic compass, barometer, RGB status light, buzzer and physical safety switch. It receives GPS, GLONASS, BeiDou and Galileo concurrently and is designed for compatible autopilot systems.
This listing includes one NEO 3 Pro module with its stand and connection cable. This is the CAN/DroneCAN NEO 3 Pro, not the UART NEO 3, NEO 3X or NEO 4. It is a standalone GNSS navigation module, not a centimeter-level RTK receiver.
Features
- u-blox NEO-M9N receiver with simultaneous reception from four GNSS constellations.
- DroneCAN communication for a compatible flight-controller CAN port.
- Integrated RM3100 magnetic compass and barometer.
- RGB status light, passive buzzer and physical safety button.
- STM32F412 processor and firmware-update support.
- SAW + LNA + SAW RF filtering.
Specifications
- Model: CUAV NEO 3 Pro
- GNSS receiver: u-blox NEO-M9N
- Processor: STM32F412, 32-bit Arm Cortex-M4
- Compass: RM3100
- GNSS: GPS L1C/A, GLONASS L1OF, BeiDou B1I and Galileo E1B/C
- Augmentation: SBAS and QZSS, subject to configuration and regional availability
- Manufacturer-listed nominal horizontal accuracy: 2.0m; best measured 0.7m is not a guaranteed operating accuracy
- Speed accuracy: 0.05m/s
- Navigation update rate: up to 25Hz
- Protocol: DroneCAN
- Module connector: GHR-04V-S
- Input voltage: 4.7-5.2V
- Operating temperature: -10 to 70 degrees C
- Module size: 60 x 60 x 16mm
- Module weight: 33g, excluding stand and cable
Connection Notes
Use the CUAV NEO 3 Pro pinout and a compatible CAN connector. Do not connect it as though it were a generic UART GPS module. CUAV lists ArduPilot 4.0 or later and PX4 1.13.0 or later in its connection guide; verify current firmware, controller support and parameters for the actual installation. A controller's CAN port does not by itself guarantee plug-and-play operation.
Mount the GNSS unit with a clear sky view, away from high-current wiring and strong magnetic or RF interference. Follow the maker's orientation and compass-calibration procedure. Satellite visibility and installation affect positioning performance. The exact barometer component may vary across documented revisions, so no specific barometer IC is promised.
Package Includes
- 1 x CUAV NEO 3 Pro GNSS CAN module.
- 1 x mounting stand.
- 1 x connection cable.
No flight controller, aircraft, battery or RTK correction equipment is included. The first image shows the module assembled with its stand and cable. Internal-component and dimension images explain the module, not extra included boards or accessories.