
The CUAV C-RTK 2 combines a u-blox ZED-F9P dual-band GNSS receiver with an STM32H7 processor for aerial mapping and other precision-positioning projects. It supports real-time RTK positioning while recording raw GNSS data for post-processed kinematic workflows.
This listing is for one C-RTK 2 PPK/RTK module. It is not a complete base-and-rover kit. An external GNSS antenna, compatible controller, correction source and any mapping or post-processing software must be provided separately.
Features
- Supports RTK positioning and raw-data recording for PPK at the same time.
- Multi-frequency GPS, GLONASS, Galileo and BeiDou reception.
- DroneCAN/UAVCAN connection for compatible ArduPilot and PX4 controllers.
- Onboard RM3100 magnetometer and ICP10111 barometer.
- Camera shutter input/output and hotshoe interface for mapping workflows.
- High-speed USB with USB-storage mode, separate F9P USB/UART access and TF-card expansion.
- Status LEDs for system, recording, camera shutter, CAN, PPS and RTK state.
Specifications
- Model: CUAV C-RTK 2
- GNSS receiver: u-blox ZED-F9P, 184 receiving channels
- Main processor: STM32H743VIH6, 2MB flash and 1MB RAM
- Concurrent GNSS: GPS, GLONASS, Galileo and BeiDou
- Supported bands: GPS L1C/A and L2C; GLONASS L1OF and L2OF; Galileo E1B/C and E5b; BeiDou B1I and B2I
- Augmentation: QZSS and SBAS, subject to configuration and local availability
- Navigation rate: RTK up to 20Hz, raw data up to 25Hz; default 5Hz
- Manufacturer-listed RMS accuracy: RTK horizontal 0.01m + 1ppm, vertical 0.02m + 1ppm; standalone GPS horizontal 1.5m
- Input voltage: 4.5-6V
- Operating temperature: -20 to 85 degrees C
- TF-card support: up to 32GB
- Antenna connector: MMCX
- Size: 56 x 33 x 16.5mm
- Module weight: 39g
Connection and Mapping Notes
Use the exact CUAV pinout and a compatible cable when connecting to a flight controller. The antenna connection is MMCX, not SMA or U.FL. An external antenna should support the required GNSS bands and be mounted with a clear sky view. Check firmware and controller compatibility before installation.
RTK needs suitable correction data and a valid RTK fix. PPK needs raw logs from the rover and a suitable base/reference source, followed by post-processing. Accuracy depends on antenna, environment, correction quality and setup. Camera diagrams are connection examples only, not included equipment or a complete mapping system.
Storage card, cables, external antenna, camera, flight controller, base station, correction service and software are not supplied. Any correction-service coverage, accounts or fees must be arranged separately.
Package Includes
- 1 x CUAV C-RTK 2 PPK/RTK GNSS module.
No antenna, TF/microSD card, cables, camera, flight controller, base station, mounting hardware, correction-service subscription or processing software is included. Gallery images show the module, its ports and pinouts, and an example RTK system arrangement.