Description:
3D Printer Endstop Limit Switch uses a lever switch to detect when it is activated. When activated, the switch is wired up so that it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated. 3D Printer Endstop Limit Switch uses a standard 4-pin 100″ pitch header and accepts a standard, old-style CD-ROM audio connector cable.
The 3D Printer Endstop Limit Switch is a simple solution to a simple problem. We want to be able to detect when an X/Y/Z stage has reached its minimum or maximum. Instead of messing with flags or complicated light beam interruptions, we use a mechanical switch.
If we place the 3D Printer Endstop Limit Switch in the path of the stage, then the stage itself will simply close the switch when it moves against it. Other than properly positioning the switch, we do not need to modify the stage at all. If you’re worried about reliability, you can sleep well at night.
Specifications:
- Operating Voltage: 300V DC
- Max. Operating Current: 2A
- Temperature Resistance: 80°C
Features:
- Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.
- 3D Printer Endstop Limit Switch has quality switching elements.
- Customized high-quality connection wires using 22AWG copper wire with ratings of current 2A, 300V voltage.
- An insulating layer over a wide range of temperatures, up to 80 degrees.
Connection Description:
- Redline: connecting VCC (ramps of +)
- Blackline: connecting GND (ramps of -)
- Greenline: connecting SIGNAL (ramps in s)
Package Included:
1 x 3D Printer Endstop Limit Switch Endstop Mechanical Limit Switch with 70cm 3 Pin Cable, Endstop Switch for 3D Printers with Cable