- Alarm Volume( With-in 1M): 80dB
- Transmission Mode: Standalone
- Working Principle: Electrochemical
Description:
It has a built-in Carbon Monoxide Detector Chip and an electrochemical sensor, Enough to detect odourless invisible and deadly carbon monoxide in the air, Quick reaction to save your life the first time when a fire hazard occurs. When a dangerous level of carbon monoxide is detected the red LED will flash and a loud alarm pattern will sound- a Loud 85 decibel alarm with LED Flash. 50ppm, alert within 60 to 90 minutes; 100ppm, alert within 10 to 40 minutes; 300ppm, alert within 3 minutes. Note: When you test the detector, please do not use gas to blow the hole directly. Coming with mounting accessories, just drill holes in appropriate positions, and done; Used for bedroom, kitchen, living room and any other area with a risk of fire danger can be installed a smoke detector and CO alarm.
Specification:
- Alarm Volume( With-in 1M): 80dB
- Transmission Mode: Standalone
- Working Principle: Electrochemical
How to Use:
- Test the alarm First:
- Step 1: Press the test button for 5s (A single silence and test button eliminates confusion and allows you to silence and test the alarm easily)
- Step 2: the unit will sound 4 beeps every 5s twice & Red LED flashes & LCD display "000" (3 min), which shows the unit in a normal situation.
- Low Power Warning:
- Carbon Monoxide Alarm alerts you to dangerous carbon monoxide, even in the event of a power outage.
- IF the alarm is low power, you can find the situation
- Sound: "Chirp" every 30s
- LED: Green LED flashes once every 30s & Red LED is flashes
- LCD Display: "Ld"
- Malfunctioning warning:
- IF the Carbon Monoxide Alarm does not work well, you can find the situation
- Sound: "Chirp" every 30s
- LED: Green LED is not flashes and Red LED is flashes
- LCD Display: "Err"
- Leaked:
- This carbon monoxide detector features a digital display that shows the carbon monoxide level in the room, as well as the unit’s power level.
- A: level over 999ppm:
- Sound: 4 short alarm beeps
- LED: Red LED is flashes
- LCD Display: "999ppm"
- B:30ppm＜ level＜ 999ppm
- Sound: 4 short alarm beeps
- LED: Red LED is flashes
- LCD Display: "actual concentration"
- Memory Mode:
- If you leave home for a long time, if the unit was alarm in this period, you just press the button for several seconds, the green light will flashes once every second and the LCD will display the actual concentration.
Note:
- 1. Don't press the test/reset button while installing batteries. Otherwise, the unit will not work.
- 2. The unit needs to be tested weekly. Verify the alarm and LED light operation by testing the unit once a week.
Package Included:
1 x Carbon Monoxide Detector, Digital Display Carbon Monoxide Alarm, Power Detection Equipment, Comply with UL2034