
The Axisflying KOLAS7 is a 7-inch foldable FPV frame kit for long-range and cinematic flying, in a True X layout on a 298mm wheelbase. Its quick-press folding arms cut the carried volume by about 40 percent, so the frame packs flat for travel and storage. This is the DJI O3 version of the frame kit, with a 30mm bottom-to-top stack space and a DJI O3 camera cradle. This is an unpowered frame kit that requires assembly, not a complete drone.
Key features
- Foldable True X 7-inch geometry on a 298mm wheelbase; folding cuts volume by about 40 percent for transport.
- Quick-press folding structure: arms deploy fast and each arm releases with a single M3 screw.
- High-strength T700 carbon plates with 6mm arms and a 2.5mm top plate; frame weight 257g with all TPU parts.
- 30mm bottom-to-top stack space designed for the DJI O3 air unit, with a dedicated DJI O3 camera cradle.
- Stack mounting for 20x20mm and 30.5x30.5mm flight controller and ESC patterns.
- Motor mounting holes M3 for 16x16mm and 19x19mm patterns; propellers up to 7 inches.
- Adjustable-angle GPS mount for faster satellite lock, plus independent receiver and beeper storage.
- Can carry a GoPro-class action camera; flight time of about 14-20 minutes with a suitable long-range build.
Recommended setup
Axisflying recommends C287 1350KV motors on 6S, a 2200-3000mAh 6S LiPo (or 18650/VTC6 long-range packs), an Argus F722 + 65A flight stack and HQ 7035 propellers for this frame.
Package contents
1 x Axisflying KOLAS7 7-inch foldable frame kit (DJI O3 version) with its TPU parts, including the DJI O3 camera cradle, adjustable GPS mount and receiver/beeper holders, plus 1 x accessories and hardware set with the frame screws and mounting hardware.
Not included: DJI O3 air unit and camera, motors, propellers, flight controller, ESC, receiver, GPS module, action camera, battery and assembly tools. Photos show the bare frame kit only; no electronics are part of this kit. Assembly is required.