
Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic
The Adafruit LTR-303 Light Sensor is a low-cost digital light sensor board built around the Lite-On LTR-303ALS-01, whose spectral response sits close to that of the human eye. It answers everyday project questions - should the display brighten or dim to save power, is it day or night, which direction has the most light for a robot to follow - with reliable, wide-ranging light measurements over a simple I2C connection.
The sensor returns 16-bit readings on two channels, Visible+IR and IR-only, so subtracting one from the other gives human-visible light. Configurable gain and integration time provide six dynamic ranges from 0.01 lux up to 64k lux, and the built-in temperature compensation, 50/60 Hz flicker rejection and standby mode keep readings steady at low power. Unlike the LTR-329 variant, the LTR-303 also offers threshold alerts with an interrupt output, handy for ultra-low-power designs that wake only when the light level crosses a set point.
Adafruit mounts the tiny ChipLED sensor on a STEMMA QT board with a voltage regulator and level-shifting circuitry, so it works with both 3.3V boards (Feather, Raspberry Pi) and 5V boards (Arduino UNO). The two STEMMA QT connectors are SparkFun Qwiic compatible for solderless plug-in hookup, and all pins also break out to a standard 0.1in / 2.54mm header for breadboarding. Adafruit provides an Arduino library with examples plus CircuitPython / Python support (installable from PyPi) to get readings quickly.
Features
- Lite-On LTR-303ALS-01 sensor with spectral response close to the human eye
- 16-bit effective resolution on Visible+IR and IR channels
- Six dynamic ranges from 0.01 lux to 64k lux, with configurable gain and integration time
- Interrupt (INT) output with programmable thresholds and hysteresis
- I2C interface up to Fast Mode (400 kbit/s), fixed address 0x29
- Onboard regulator and level shifting: 3.3V-5V supply and logic
- Two STEMMA QT / Qwiic-compatible JST-SH connectors for solderless wiring
- Immune to IR/UV sources, rejects 50/60 Hz lighting flicker, built-in temperature compensation
- Low active power with standby mode; operating temperature -30 to +70 deg C
- RoHS and halogen-free
Specifications
- Sensor: Lite-On LTR-303ALS-01, ultra-small ChipLED package
- Interface: I2C, up to 400 kbit/s, address 0x29 (cannot be changed)
- Operating voltage: 3.3V to 5V DC
- Board dimensions: 25.3 x 17.7 x 4.8 mm
- Weight: 1.9 g
Package Includes
- 1 x Adafruit LTR-303 Light Sensor breakout board with one 8-pin 0.1in header strip (header requires soldering if you use it)
Not included: STEMMA QT / Qwiic cable, microcontroller or any other items shown for demonstration.