- Color: Silver
- Size: 3.4 x 3.3cm
- Capacity: 50KG
- Brand new and high quality
Description:
When measuring, the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the intermediate, adhesive coating with white beam arms) and the outer edges to form a shear force in the opposite direction, i. e., middle strain beam bending necessary changes can occur under stress, strain beam side by another force should not be a barrier.
Resistance strain: 50kg half-bridge sensor.
Specification:
| Capacity | 50 Kg |
| Output Sensitivity | 1.0±0.1 mv/v |
| Nonlinearity | 0.03 %FS |
| Repeatability | 0.03 %FS |
| Input Resistance | 1000 Ω |
| Insulation Resistance | ≥5000 MΩ |
Features:
- 100% Brand new and high quality.
- Internal 1000Ohm half-bridge strain gauge load cell, the range is 50kg, half-bridge structure.
- When measuring, the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the middle, with a beam of white plastic cover arm) and the outside edges to form a shear force in the opposite direction, i.e., in the middle of strain beam bending necessary changes can occur under stress, strain beam side by another force cannot have a barrier.
The sensor uses the following three methods:
- using a sensor with external resistors full bridge measurement range of a sensor range: 50kg. Higher requirements for external resistor
- the use of only two full-bridge sensors measuring range is the range of the two sensors and: 50kgx2 = 100kg
- the use of four full-bridge sensors measuring range is the range of four sensors and: 50kgx4 = 200kg
Package Included:
1 x 50kg Half-Bridge Weight Scales Sensor Resistance Strain Human Scale Load Sensor