Description:
The Raspberry Pi PoE+ HAT is a Power Over Ethernet (PoE+) accessory for the Raspberry Pi 3B+/4B. Compared to its predecessor Raspberry Pi PoE HAT, it features better cooling effect, implementing the 802.3af/at standard with 5V DC/4A larger power output, providing enough power for both Raspberry Pi 3B+/4B at max load and other peripherals at the same time.
Specifications:
- PoE Standard: IEEE 802.3at-2009 PoE
- Input voltage: 37-57 V DC, Class 4 device
- Output power: 5 V DC/4 A
- Transformer design: Planar
- Operating temperature: 0 °C to +50 °C
- Cooling: 25 mm × 25 mm brushless fan delivering 2.2 CFM for processor cooling
Features:
- Fully isolated switched-mode power supply.
Connecting Your PoE HAT To The Raspberry Pi:
- Before installing the PoE+ HAT, you must attach the supplied spacers in the four corners of the board
- Then connect the Raspberry Pi PoE+ HAT to the two 0.1" headers (40 + 4) that are fitted on your Raspberry Pi
- Once the PoE+ HAT board is connected, you can power your Raspberry Pi through its RJ45 network connector
Disconnecting Your PoE HAT:
- Take care when separating the HAT from your Raspberry Pi
- Pull evenly so that it detaches from all the pins at the same rate; do not pull one end of the connector off before the other
Instructions:
- Do not cover the fan
- It is forbidden to insert any elements between the blades while the fan is operating.
- The product must not be exposed to water or moisture.
- The overlay cannot be placed on a conductive surface
- POE HAT cannot be used in too hot a place. It is designed to work at room temperature
- When lifting, be careful not to damage it mechanically.
- Avoid electrostatic damage, do not touch the device while it is working
- Peripheral devices should comply with the relevant standards
Useful Link:
Raspberry Pi PoE+ HAT Datasheet
Package Included:
1 x Raspberry Pi PoE+ HAT Pi Power Over Ethernet+ HAT RPi PoE+ HAT Raspberry Pi PoE+ HAT For Raspberry Pi 3B+/4B Power Your Raspberry Pi Over Ethernet Pi PoE+ HAT 802.3af/at-Compliant
