- Supply Voltage: 9V
- DC jack Size: 2.1mm
- Excellent material
- fine workmanship
- It is an environmental 9V battery buckle
Description:
A 9V to Barrel Jack Adapter is an adapter which transfers the 9 volts from a battery to a DC power plug- which then can be plugged in and power a DC power barrel jack with 9 volts. To use this device, a user just connects a standard 9-volt battery to the 9-volt battery holder slot of the adapter. When inserted correctly, the battery's voltage will be transferred to the DC power plug. The 9V Battery Snap Connector with Power Plug provides the ability to conveniently use a 9V battery to power many common boards and modules such as the popular Arduino and compatible microcontrollers. This plug is a very common barrel type with an outside diameter of 5.5mm and an inside diameter of 2.1mm. The center is positive.
Specification:
- Supply Voltage: 9V
- DC jack Size: 2.1mm
Features :
- Excellent material
- fine workmanship
- It is an environmental 9V battery buckle
- T- fonts, with red and black connecting lines
- The Cable Length: Approx. 12cm
- Save power and protect the environment
- Good electrical conductivity and comfortable sense of touch
Application:
- This DC power plug can then be plugged into any DC power barrel jack (of equivalent size). The DC power barrel will then supply 9 volts to the circuit to which it is connected.
- This is very handy for any type of circuit where you want to supply 9 volts to the circuit and you want it to operate on battery power, or if you just don't have a standard 9-volt power adapter.
- This setup with a 9V to Barrel Jack Adapter can be used to power your own custom-made circuit in which you power it with a DC plug plugged into the DC barrel, or it can be used to power boards with DC power barrel jacks installed into them. Many boards have DC barrels, including Arduino boards, parallax boards, and many others
Package Included:
1 x DC 9V Battery Snapper Connector With DC Jack Button Power Cable For Arduino