• CD74HC4067 16-Channel Multiplexer
  • CD74HC4067 16-Channel Multiplexer
  • CD74HC4067 16-Channel Multiplexer
1 3

Generic

CD74HC4067 Breakout Board 16-Channel Analog/Digital Multiplexer Breakout Board Module Easy-to-Use Multiplexer Board for Arduino - RS1164

CD74HC4067 Breakout Board 16-Channel Analog/Digital Multiplexer Breakout Board Module Easy-to-Use Multiplexer Board for Arduino - RS1164

RS1164

In stock

Rs. 45.00
Rs. 45.00
Sale Sold out
Shipping calculated at checkout.

Note: In case you receive a damaged or faulty product, please return it in the original box with all foam and packaging. Returns will not be accepted if further damage occurs due to improper packing.

For refund/return/replacement, call us at +91 95991 22209 or mail us at support@rees52.com

Delivery Time

  • Delivery time with the Express Shipping option is 2-3 working days, and with the Standard Shipping option is 5-6 working days. It varies based on location, reliant on courier services.

  • Delivery time if the order item is on Preorder Status is 15-20 working days.

COD (Cash on Delivery)

  • For COD you have to pay extra charges of Rs 350/- before the shipment. (We will share the company QR Code, UPI ID or Account details for the same)
View full details

Description:

This is a CD74HC4067 16-Channel Multiplexer breakout board that mounts a 74HC4067 which is a 16-channel Analog multiplexer/demultiplexer that can route both analog and digital signals in both directions. 1 of 16 input channels can be routed to 1 output or 1 input can be routed to 1 of 16 output channels.

CD74HC4067 16-Channel Multiplexer can handle analog signals such as from analog sensors or a bank of potentiometers or CD74HC4067 16-Channel Multiplexer can handle digital signals such as from switches, digital sensors or even serial communications. The 74HC4067 can operate over the range of 2 to 6V, so CD74HC4067 16-Channel Multiplexer is compatible with both 3.3 and 5V logic.

CD74HC4067 16-Channel Multiplexer uses binary addressing, so address 0000 is Channel 0, address 1111 is Channel 15. When a channel is ON, CD74HC4067 16-Channel Multiplexer has a resistance of about 70 ohms which allows signals to flow both ways. Maximum current is 25mA through any of the channels.

Specifications:

  • Chipset: CD74HC4067
  • Channels: 16
  • Address Lines: 4
  • Supply: 2V to 6V
  • On resistance: 70 Ohms @ 4.5V
  • 6ns break-before-make @ 4.5V
  • Temperature Range: -55C to 125C

Pin Description:

On the electronics module there are 2 rows of header solder points. These can be used to connect wires to or header pins depending on the application.
  • 1×8 Header Location
  • SIG = Signal Input / Output. This will usually connect to an analog input or digital I/O on the microcontroller
  • S3 = Binary Address Bit 3. The address bits (3…0) connect to 4 digital output pins on the microcontroller to select channel.
  • S2 = Binary Address Bit 2
  • S1 = Binary Address Bit 1
  • S0 = Binary Address Bit 0
  • EN = Enable. Internally pulled LOW to enable by default. Can be pulled HIGH to disable all channels.
  • VCC = 2 to 6V. Usually connected to 5V or 3.3V to match the microcontroller power.
  • GND = Ground, must be common with the microcontroller.
  • 1×16 Header Location
  • C15 = Channel 15
  • C0 = Channel 0

Package Included:

1 x CD74HC4067 Breakout Board 16-Channel Analog/Digital Multiplexer Breakout Board Easy-to-Use Multiplexer Board for Arduino