{"product_id":"sunlu-water-wash-abs-like-uv-3d-printer-resin-1kg-bottle-beige","title":"SUNLU Water-Wash ABS-Like UV 3D Printer Resin 1kg Bottle - Beige","description":"  \u003ch2\u003eSUNLU Water-Wash ABS-Like Resin - Beige, 1kg\u003c\/h2\u003e\n\u003cp\u003eSUNLU Water-Wash ABS-Like Resin is a liquid photopolymer for UV resin 3D printing, supplied here as one 1kg bottle in Beige. It combines water-based cleaning with an ABS-like balance of strength and toughness, making it a useful choice for detailed display models, educational projects, figurines and prototype parts. This is the Water-Wash ABS-Like formulation, not standard resin, ordinary ABS-Like resin or the separate 14K ABS-Like range. It is not filament and cannot be used in an FDM printer.\u003c\/p\u003e\n\u003ch3\u003eWater-cleanable prints with a tough finish\u003c\/h3\u003e\n\u003cp\u003eThe formulation is designed so that uncured resin can be washed from printed models using water. This can simplify the cleaning stage for a resin-printing workspace that does not want to rely on an alcohol wash for every model. Water-washable does not mean harmless, however. Collect contaminated wash water and resin residue for suitable disposal. Never wash resin into a sink, drain, garden or watercourse. Complete cleaning, drying and UV post-curing before handling a finished part without protective gloves.\u003c\/p\u003e\n\u003cp\u003eBeige is a practical choice for warm-toned display pieces, figurines and models intended for a painted finish. The result still depends on the model design, support layout, printer exposure and curing process. Thin features can break, and printed parts should be tested before use in an assembly. Manufacturer photographs show example prints and equipment; printed models, printers, tools and extra bottles are not included.\u003c\/p\u003e\n\u003ch3\u003eSet up for your printer\u003c\/h3\u003e\n\u003cp\u003eSUNLU lists a 365-405nm curing wavelength range for this family. Check that your resin printer supports the material and use a small calibration model before committing to a long job. Shake the sealed bottle thoroughly to mix settled pigment, then allow bubbles to clear before printing. SUNLU recommends a printing environment of 25-30°C and a reference layer thickness of 0.05mm. Exposure and lifting settings need adjustment for the printer, screen type, layer height and model geometry rather than copying one setting to every machine.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSUNLU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial family\u003c\/th\u003e\n\u003ctd\u003eWater-Wash ABS-Like photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour and pack\u003c\/th\u003e\n\u003ctd\u003eBeige; one 1kg bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuring wavelength\u003c\/th\u003e\n\u003ctd\u003e365-405nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eViscosity at 25°C\u003c\/th\u003e\n\u003ctd\u003e400-800mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength\u003c\/th\u003e\n\u003ctd\u003e26MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural strength\u003c\/th\u003e\n\u003ctd\u003e34MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at break\u003c\/th\u003e\n\u003ctd\u003e24%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNotched Izod impact strength\u003c\/th\u003e\n\u003ctd\u003e120J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShore hardness\u003c\/th\u003e\n\u003ctd\u003e77D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat distortion temperature\u003c\/th\u003e\n\u003ctd\u003e47°C at 0.45MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStorage guidance\u003c\/th\u003e\n\u003ctd\u003eSealed, protected from light; 15-35°C and below 60% relative humidity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMechanical values are SUNLU's typical laboratory reference data for the resin family, not guaranteed performance for every printed part. Printer settings, orientation and curing can change the result.\u003c\/p\u003e\n\u003ch3\u003eHandling and storage\u003c\/h3\u003e\n\u003cp\u003eUse protective gloves, eye protection and adequate ventilation when working with liquid resin and contaminated cleaning materials. Avoid skin and eye contact and do not inhale vapour or mist. Low odour is not a safety certification. Keep the bottle tightly closed, upright and away from sunlight, food, children and pets. Follow the current safety data sheet and local rules for disposal of resin, wash water and contaminated packaging. This material is not presented as food-safe, skin-safe or a certified medical material.\u003c\/p\u003e\n\u003ch3\u003ePackage includes\u003c\/h3\u003e\u003cp\u003e1 x SUNLU Water-Wash ABS-Like Resin, Beige, 1kg bottle.\u003c\/p\u003e","brand":"SUNLU","offers":[{"title":"Default Title","offer_id":51898108739751,"sku":"IR0000229","price":1516.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/1-1-b55-wwabs-beige-hero.jpg?v=1794813317","url":"https:\/\/rees52.com\/products\/sunlu-water-wash-abs-like-uv-3d-printer-resin-1kg-bottle-beige","provider":"REES52","version":"1.0","type":"link"}