{"product_id":"sunlu-abs-like-uv-3d-printer-resin-1kg-bottle-dark-grey","title":"SUNLU ABS-Like UV 3D Printer Resin 1kg Bottle - Dark Grey","description":"  \u003ch2\u003eSUNLU ABS-Like Resin - Dark Grey, 1kg\u003c\/h2\u003e\n\u003cp\u003eThis listing supplies one 1kg bottle of SUNLU ABS-Like Resin in Dark Grey for compatible UV resin 3D printers. It is a liquid photopolymer designed for models that need more toughness than ordinary rigid display resin. The ABS-like name describes its intended cured performance; it is not ABS filament, injection-moulding plastic or a guarantee that every printed part will behave like manufactured ABS. This is the ordinary ABS-Like formulation, not 14K ABS-Like, water-wash ABS-Like or a numbered upgraded version.\u003c\/p\u003e\n\u003ch3\u003eFor Detailed Models and Prototype Parts\u003c\/h3\u003e\n\u003cp\u003eSUNLU positions this material for figurines, decorative models and engineering prototypes that benefit from a balance of strength, bending performance and impact resistance. Dark Grey provides a neutral base for inspecting surface details and planning painted finishes. Small housings, fit-check models and mechanical demonstration pieces are possible applications, but each design must be tested for its actual loads and environment. Do not assume suitability for safety-critical, food-contact, medical or prolonged high-temperature use.\u003c\/p\u003e\n\u003cp\u003eThe gallery includes the Dark Grey bottle and manufacturer examples of printed parts, models and other colors in the ABS-Like range. These images illustrate possible results and material-family features. Only the single Dark Grey 1kg bottle is included. Models, tools, printers and other bottles are not supplied. Final appearance and strength depend on the printer, orientation, supports, exposure, cleaning and post-curing.\u003c\/p\u003e\n\u003ch3\u003eCalibrate, Clean and Post-Cure\u003c\/h3\u003e\n\u003cp\u003eThe technical data sheet lists a curing wavelength of 365-405nm. Check your printer's resin compatibility before use and run an exposure calibration for your machine and layer height. Shake the bottle thoroughly, allow bubbles to settle, and work away from direct sunlight. A successful profile for another resin or color should not be treated as a guaranteed starting point for this bottle.\u003c\/p\u003e\n\u003cp\u003eThis is not a water-washable resin. SUNLU's technical guidance specifies cleaning with at least 95% ethanol or isopropyl alcohol, followed by post-curing in a suitable curing chamber. Avoid extended soaking, handle cleaning solvents according to their own safety instructions, and adjust processing after checking a test print. The figures in the table are manufacturer laboratory reference values, not guaranteed performance specifications for a finished part.\u003c\/p\u003e\n\u003ch3\u003eHandling and Storage\u003c\/h3\u003e\n\u003cp\u003eLow odor does not mean harmless. The ABS-Like safety data sheet warns of harmful swallowing, skin irritation, allergic skin reactions, severe eye damage, respiratory irritation, possible organ damage after repeated exposure, and long-lasting aquatic toxicity. Wear suitable protective gloves, clothing and eye protection, provide good ventilation, and avoid breathing vapor or spray. Keep resin away from children, food and drink.\u003c\/p\u003e\n\u003cp\u003eKeep the original container tightly closed, upright and protected from light. The current technical data sheet recommends storage at 15-35 degrees Celsius with relative humidity below 60%. Read the current safety data sheet before use. Keep uncured resin and contaminated solvent out of drains and dispose of waste under local requirements.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eSUNLU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eABS-Like UV photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColor\u003c\/th\u003e\n\u003ctd\u003eDark Grey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet contents\u003c\/th\u003e\n\u003ctd\u003e1kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCuring wavelength\u003c\/th\u003e\n\u003ctd\u003e365-405nm; verify printer compatibility\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTypical tensile strength\u003c\/th\u003e\n\u003ctd\u003e28 MPa, manufacturer laboratory reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTypical elongation at break\u003c\/th\u003e\n\u003ctd\u003e25%, manufacturer laboratory reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTypical flexural strength\u003c\/th\u003e\n\u003ctd\u003e36 MPa, manufacturer laboratory reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTypical Shore hardness\u003c\/th\u003e\n\u003ctd\u003e80 HD, manufacturer laboratory reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTypical viscosity\u003c\/th\u003e\n\u003ctd\u003e300-700 mPa.s at 25 degrees Celsius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCleaning\u003c\/th\u003e\n\u003ctd\u003eSolvent cleaning; not water-washable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage includes\u003c\/th\u003e\n\u003ctd\u003e1 x Dark Grey ABS-Like Resin 1kg bottle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"SUNLU","offers":[{"title":"Default Title","offer_id":51897407275175,"sku":"IR0000220","price":2431.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/1-1-b46-abs-darkgrey-hero.jpg?v=1794807554","url":"https:\/\/rees52.com\/products\/sunlu-abs-like-uv-3d-printer-resin-1kg-bottle-dark-grey","provider":"REES52","version":"1.0","type":"link"}