{"product_id":"sunlu-14k-red-wax-uv-3d-printer-resin-1kg-bottle","title":"SUNLU 14K Red Wax UV 3D Printer Resin 1kg Bottle","description":"  \u003cp\u003eSUNLU 14K Red Wax UV 3D Printer Resin is a 1kg bottle of rigid photopolymer resin for finely detailed models with a matte, red-wax-like appearance. It suits decorative pieces, head sculpts, figurines and display models where small surface details are part of the design. This listing supplies one bottle of resin. Printed models, printers, tools and other equipment shown in the photographs are application examples and are not included.\u003c\/p\u003e\n\u003ch3\u003eA matte finish for detailed models\u003c\/h3\u003e\u003cp\u003eThe red-wax colour makes surface textures, folds and sculpted features easy to see. SUNLU describes the formulation as a high-precision resin with a matte finish and good flow. The 14K name identifies the resin range; the detail you achieve still depends on the printer, model, layer settings, supports and exposure calibration. Using this resin does not change a printer's hardware resolution.\u003c\/p\u003e\n\u003cp\u003eRed Wax describes the appearance of the printed material. Do not assume that it is a castable wax, a dental resin or a validated material for burnout casting. Check the requirements of any specialised process separately. For ordinary display work, the rigid formulation offers a different feel from flexible, nylon-like or water-washable resin families.\u003c\/p\u003e\n\u003ch3\u003ePrinting, washing and curing\u003c\/h3\u003e\u003cp\u003eThe manufacturer's technical guide lists a curing wavelength of 365-405 nm. Confirm compatibility with your resin printer and make a small exposure test before starting a large model. SUNLU suggests a printing environment of 25-30°C and relative humidity below 60%. Printer settings are starting points rather than universal values, so adjust them for your machine, layer thickness and model geometry.\u003c\/p\u003e\n\u003cp\u003eUse clean ethanol or isopropyl alcohol at a concentration of at least 95% for washing, following the resin and washing-equipment instructions. The technical guide suggests 5-6 minutes of cleaning and 3-5 minutes of post-curing in a curing chamber. Allow the model to dry and follow the equipment's safety instructions. This is not a water-washable resin, and resin-contaminated liquid must not be poured into drains.\u003c\/p\u003e\n\u003ch3\u003eHandling and storage\u003c\/h3\u003e\u003cp\u003eLow odour does not mean uncured resin is harmless. Wear suitable protective gloves and eye protection, work with good ventilation and avoid skin contact, inhalation and splashes. Keep the bottle away from children, food and drinking areas. Store it sealed and protected from light at 15-35°C, with relative humidity below 60%, as stated in SUNLU's technical guide. Follow the current safety data sheet for spill response, first aid and local waste disposal.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSUNLU\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResin range\u003c\/td\u003e\n\u003ctd\u003e14K Red Wax rigid photopolymer resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour \/ finish\u003c\/td\u003e\n\u003ctd\u003eRed Wax \/ matte\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet resin weight\u003c\/td\u003e\n\u003ctd\u003e1kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCuring wavelength\u003c\/td\u003e\n\u003ctd\u003e365-405 nm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical viscosity at 25°C\u003c\/td\u003e\n\u003ctd\u003e300-600 mPa·s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical tensile strength (Z)\u003c\/td\u003e\n\u003ctd\u003e40 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical elongation at break (Z)\u003c\/td\u003e\n\u003ctd\u003e15%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical flexural strength (Z)\u003c\/td\u003e\n\u003ctd\u003e45 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical flexural modulus (Z)\u003c\/td\u003e\n\u003ctd\u003e1909 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical notched Izod impact at 23°C (Z)\u003c\/td\u003e\n\u003ctd\u003e30 J\/m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical hardness\u003c\/td\u003e\n\u003ctd\u003eShore D 84\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical heat distortion temperature (Z)\u003c\/td\u003e\n\u003ctd\u003e53°C at 0.45 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCleaning\u003c\/td\u003e\n\u003ctd\u003e≥95% ethanol or isopropyl alcohol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage contents\u003c\/td\u003e\n\u003ctd\u003e1 × 1kg bottle of SUNLU 14K Red Wax Resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003cp\u003eMechanical and thermal figures are typical manufacturer laboratory values for reference, not guaranteed results for every print. Check the bottle label and current technical and safety instructions before use.\u003c\/p\u003e","brand":"SUNLU","offers":[{"title":"Default Title","offer_id":51899421458599,"sku":"IR0000238","price":2214.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/1-1-b65-redwax.jpg?v=1794821296","url":"https:\/\/rees52.com\/products\/sunlu-14k-red-wax-uv-3d-printer-resin-1kg-bottle","provider":"REES52","version":"1.0","type":"link"}