{"product_id":"sparkfun-nanobeacon-board-in100","title":"SparkFun NanoBeacon Board - IN100","description":"\u003ch2\u003eSparkFun NanoBeacon Board - IN100\u003c\/h2\u003e\n\u003cp\u003eThe SparkFun NanoBeacon Board is a 2.4GHz Bluetooth Low Energy beacon breakout built around the InPlay IN100 NanoBeacon module. The IN100 is compliant with several standard 2.4GHz beacon protocols - including BT, Google Eddystone and Apple iBeacon - and is designed for exceptionally low power draw (under 650nA in sleep mode), so a beacon can run in the field for years on a coin cell. It suits wireless sensor monitoring, asset tracking, retail beacons, or building your own tag for real-time location monitoring.\u003c\/p\u003e\n\u003cp\u003eSetup needs no firmware work: the InPlay NanoBeacon Config Tool provides a graphical interface for configuring advertising, pairing and data packets without writing code. A 12mm coin-cell holder on the board accepts a 3V CR1225 battery (not included). For integration, the board offers a vertical Qwiic connector for solderless I2C sensors, a 3.3V UART breakout for a direct Serial Basic connection, four GPIO pins (4-7) and two I\/O power-switch pins (SW0, SW1).\u003c\/p\u003e\n\u003cp\u003eThis version of the board is built for rapid implementation: male headers come pre-soldered on the 0.1-inch-spaced through-hole pins, and the power LED and reset button are not populated. (SparkFun also offers a Lite version without these extras.)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant configuration warning:\u003c\/strong\u003e when programming the IN100 with the InPlay NanoBeacon Config Tool, the \"Burn\/Program\" option uploads the settings and permanently locks the module - this cannot be undone and can brick the IN100. Use the tool's \"Run in RAM\" testing mode first and make sure everything works as intended before burning; note that I2C is not available in RAM testing mode, so I2C sensor code should be verified before clicking \"Burn\/Program\".\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInPlay IN100 NanoBeacon 2.4GHz BT beacon module\u003c\/li\u003e\n\u003cli\u003eSupply voltage range: 1.1V to 3.6V\u003c\/li\u003e\n\u003cli\u003eUltra-low power: under 650nA in sleep mode\u003c\/li\u003e\n\u003cli\u003eBeacon modes: Proprietary, BT, Google Eddystone and Apple iBeacon compliant\u003c\/li\u003e\n\u003cli\u003ePre-soldered male headers on through-hole pins: 3.3V UART, 4x GPIO, 2x switch pins\u003c\/li\u003e\n\u003cli\u003eCoin-cell battery holder for a 3V CR1225 battery (battery not included)\u003c\/li\u003e\n\u003cli\u003e1x vertical Qwiic connector for solderless I2C sensors\u003c\/li\u003e\n\u003cli\u003eCode-free setup with the InPlay NanoBeacon Config Tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x SparkFun NanoBeacon Board - IN100 (with pre-soldered male headers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eNot included: CR1225 coin cell battery, Qwiic cable, sensors and USB-to-serial adapter are sold separately.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eUseful Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/products\/21327\"\u003eSparkFun product page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/2847\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/a\/2\/6\/2\/SparkFun_NanoBeacon_Board_-_IN100.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/3\/d\/5\/5\/1\/IN100-Datasheet.pdf\"\u003eIN100 Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/b\/e\/d\/a\/f\/NanoBeacon_Config_Tool_User_Guide_EN.pdf\"\u003eNanoBeacon Config Tool User Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_NanoBeacon_Board_-_IN100\"\u003eHardware GitHub Repository\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51938504081575,"sku":"IR0000360","price":688.98,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/21327-SparkFun_NanoBeacon_Board_-_IN100-01.jpg?v=1795145908","url":"https:\/\/rees52.com\/products\/sparkfun-nanobeacon-board-in100","provider":"REES52","version":"1.0","type":"link"}