{"product_id":"sparkfun-gps-28137-gnss-flex-phat-for-raspberry-pi","title":"SparkFun GPS-28137 GNSS Flex pHAT for Raspberry Pi","description":"\u003ch2\u003eSparkFun GPS-28137 GNSS Flex pHAT for Raspberry Pi\u003c\/h2\u003e\n\u003cp\u003eThe SparkFun GNSS Flex pHAT (GPS-28137) is a solder-free carrier board for modular SparkPNT GNSS Flex modules, enabling easy high-precision GNSS integration with single-board computers. It is the heart of the SparkPNT Flex ecosystem, providing a plug-and-play bridge between a GNSS Flex module and a Raspberry Pi, NVIDIA Jetson Orin Nano, Google Coral or other compatible single-board computer. Simply stack the pHAT on the 40-pin header, attach a GNSS Flex module to the two 2x10-pin Flex headers, and the navigation system is ready to configure.\u003c\/p\u003e\n\u003cp\u003ePlease note that this is a carrier board only and does not include a GNSS module. This modular approach lets the perfect receiver engine be selected for each application, from meter-level positioning in urban environments to all-band RTK with heading for autonomous navigation, using any SparkPNT GNSS Flex module.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSolder-free carrier board for SparkPNT GNSS Flex modules; pre-soldered 40-pin header stacks directly onto a Raspberry Pi, NVIDIA Jetson Orin Nano, Google Coral or compatible single-board computer.\u003c\/li\u003e\n\u003cli\u003eModular Flex headers: two standardized 2x10-pin male headers for attaching, swapping or upgrading a GNSS Flex module at any time.\u003c\/li\u003e\n\u003cli\u003eFull interface access: breaks out all potential interfaces from the attached module, including up to four UARTs, I2C, USB and critical timing signals (PPS and event).\u003c\/li\u003e\n\u003cli\u003eUSB-C interface for direct communication with the GNSS Flex module from a computer.\u003c\/li\u003e\n\u003cli\u003eSMA antenna connector bridged to a U.FL connector; jumper the U.FL connectors on the module and pHAT with a short U.FL cable for a sturdy external-antenna connection.\u003c\/li\u003e\n\u003cli\u003eQwiic connectors for the I2C bus of the attached module.\u003c\/li\u003e\n\u003cli\u003eCommunicates by default over the Raspberry Pi primary serial bus (TX: GPIO14\/Pin 8, RX: GPIO15\/Pin 9); other interfaces can be used instead.\u003c\/li\u003e\n\u003cli\u003eBoard dimensions 65.0 mm x 56.5 mm with four mounting holes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x SparkFun GPS-28137 GNSS Flex pHAT for Raspberry Pi\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo GNSS Flex module, Raspberry Pi or other single-board computer, GNSS antenna, U.FL cable or Raspberry Pi HAT hardware is included. Any coin shown in photographs is a size reference only, not package contents.\u003c\/p\u003e\n\u003ch2\u003eUseful Links\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/sparkfun-gnss-flex-phat.html\"\u003eOfficial SparkFun GPS-28137 product page and specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.sparkfun.com\/SparkFun_GNSS_Flex_System\/SparkFun_GNSS_Flex_pHAT\/hardware_overview\/\"\u003eSparkFun GNSS Flex pHAT hardware overview and hookup guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_GNSS_Flex_pHAT\"\u003eHardware repository with schematic, KiCad files and board dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51934467424423,"sku":"IR0000326","price":3151.69,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/28137-GNSS-Flex-Phat-Feature.jpg?v=1795119956","url":"https:\/\/rees52.com\/products\/sparkfun-gps-28137-gnss-flex-phat-for-raspberry-pi","provider":"REES52","version":"1.0","type":"link"}