{"product_id":"sparkfun-gps-17285-neo-m9n-sma-gps-breakout-qwiic","title":"SparkFun GPS-17285 NEO-M9N SMA GPS Breakout with Qwiic","description":"\u003cp\u003eThe SparkFun GPS-17285 is a NEO-M9N GNSS breakout for projects that need an external SMA-connected antenna. Its u-blox M9 receiver can track GPS, GLONASS, Galileo and BeiDou together, while Qwiic connectors and broken-out pins provide practical ways to connect a host controller.\u003c\/p\u003e\u003cp\u003eThis is the SMA version, not the GPS-15712 U.FL board or GPS-15733 chip-antenna version. An external GNSS antenna is required and is not included. It is a positioning receiver, not a magnetic compass or an RTK base\/rover system.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e92-channel u-blox NEO-M9N receiver with four-constellation tracking.\u003c\/li\u003e\n\u003cli\u003eSMA socket for a separately purchased compatible GNSS antenna.\u003c\/li\u003e\n\u003cli\u003eQwiic I2C connectors, USB-C connection and accessible signal pads.\u003c\/li\u003e\n\u003cli\u003eRechargeable backup cell for retaining receiver data between powered sessions.\u003c\/li\u003e\n\u003cli\u003eConfigurable update rate and receiver settings using supported u-blox software or SparkFun's Arduino library.\u003c\/li\u003e\n\u003cli\u003ePower and pulse-per-second indicator LEDs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: GPS-17285\u003c\/li\u003e\n\u003cli\u003eReceiver: u-blox NEO-M9N, 92 channels\u003c\/li\u003e\n\u003cli\u003eGNSS systems: GPS, GLONASS, Galileo and BeiDou\u003c\/li\u003e\n\u003cli\u003eAntenna connector: SMA; antenna sold separately\u003c\/li\u003e\n\u003cli\u003eMaximum navigation update rate: up to 25Hz, configuration dependent\u003c\/li\u003e\n\u003cli\u003eManufacturer-rated horizontal accuracy: approximately 1.5m under suitable conditions; not a guaranteed field result\u003c\/li\u003e\n\u003cli\u003eModule supply and logic level: 3.3V\u003c\/li\u003e\n\u003cli\u003eTypical tracking current: approximately 31mA for GPS and GLONASS\u003c\/li\u003e\n\u003cli\u003eInterfaces: Qwiic I2C, UART and USB-C; follow the hookup guide for alternate pin functions\u003c\/li\u003e\n\u003cli\u003eProtocols: NMEA, UBX and RTCM support, subject to receiver configuration\u003c\/li\u003e\n\u003cli\u003eBoard footprint: approximately 40.64 x 36.83mm, excluding connector projection\u003c\/li\u003e\n\u003cli\u003eTypical manufacturer-listed cold\/hot start: 24 seconds \/ 2 seconds, dependent on retained data and reception\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eConnection and Setup\u003c\/h3\u003e\u003cp\u003eConnect a suitable SMA GNSS antenna and place it with a clear view of the sky. Use the official hookup guide to choose USB-C, Qwiic I2C or the breakout pins. The receiver logic is 3.3V. Do not connect 5V logic directly to the signal pins or confuse the regulated input with the 3.3V supply pin.\u003c\/p\u003e\u003cp\u003eUse SparkFun's u-blox GNSS library or supported u-blox configuration software to set output messages, rate and communication settings. Backup-cell retention and hot-start results depend on charge state, elapsed time and signal conditions. This board does not provide centimeter-level RTK positioning merely because it supports RTCM messages.\u003c\/p\u003e\u003ch3\u003ePackage Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x SparkFun GPS-17285 NEO-M9N SMA GPS breakout board with Qwiic connectors.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eNo GNSS antenna, USB cable, Qwiic cable, headers, host controller or battery pack is included. The onboard backup cell is part of the board and does not power the complete receiver during normal use. Rulers in the scale photo are not included. The application photo shows a separately purchased RedBoard, antenna and cables for connection reference only.\u003c\/p\u003e\u003ch3\u003eUseful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/sparkfun-gps-breakout-neo-m9n-sma-qwiic.html\" target=\"_blank\" rel=\"noopener\"\u003eOfficial SparkFun GPS-17285 specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-gps-neo-m9n-hookup-guide\/all\" target=\"_blank\" rel=\"noopener\"\u003eSparkFun NEO-M9N hookup guide, select the SMA version\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_u-Blox_NEO_M9N\" target=\"_blank\" rel=\"noopener\"\u003eOfficial SparkFun NEO-M9N hardware files and schematics\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51933593567399,"sku":"IR0000318","price":9050.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/17285-SparkFun_GPS_Breakout_-_NEO-M9N__SMA__Qwiic_-01.jpg?v=1795111972","url":"https:\/\/rees52.com\/products\/sparkfun-gps-17285-neo-m9n-sma-gps-breakout-qwiic","provider":"REES52","version":"1.0","type":"link"}