{"product_id":"sparkfun-gps-15136-rtk2-zed-f9p-qwiic-breakout","title":"SparkFun GPS-15136 GPS-RTK2 ZED-F9P Qwiic GNSS Breakout","description":"\u003cp\u003eThe SparkFun GPS-15136 GPS-RTK2 breakout carries the u-blox ZED-F9P dual-band GNSS receiver. It can work as a rover receiving RTCM correction data or as a fixed base station generating corrections after configuration. USB-C and two Qwiic connectors make it suitable for embedded positioning, mapping and robotics projects.\u003c\/p\u003e\n\u003cp\u003eThis is the U.FL GPS-RTK2 board, not the RTK-SMA version. An external GNSS antenna is required. Centimeter-level RTK positioning also needs suitable correction data and a valid RTK fix; the board alone is not a complete survey kit.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConcurrent GPS, GLONASS, Galileo and BeiDou reception with L1\/L2 dual-band capability.\u003c\/li\u003e\n\u003cli\u003eConfigurable rover and base-station operation with RTCM correction support.\u003c\/li\u003e\n\u003cli\u003eUSB-C for power, configuration and serial data, plus dual Qwiic I2C connectors.\u003c\/li\u003e\n\u003cli\u003eBroken-out UART1, UART2\/RTCM and control signals; selectable SPI interface shares pins with I2C and UART1.\u003c\/li\u003e\n\u003cli\u003eU.FL external antenna connector and PCB cut-out for an optional antenna-cable bulkhead.\u003c\/li\u003e\n\u003cli\u003eRechargeable backup battery for configuration and orbit-data retention, with power, PPS, RTK and geofence status LEDs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: GPS-15136\u003c\/li\u003e\n\u003cli\u003eReceiver family: u-blox ZED-F9P\u003c\/li\u003e\n\u003cli\u003eGNSS: GPS, GLONASS, Galileo and BeiDou\u003c\/li\u003e\n\u003cli\u003eAntenna port: U.FL, external antenna required\u003c\/li\u003e\n\u003cli\u003ePower: 5V input\/USB or clean 3.3V input; all logic is 3.3V\u003c\/li\u003e\n\u003cli\u003eTypical current: 68-130mA, depending on constellation selection and tracking state\u003c\/li\u003e\n\u003cli\u003eInterfaces: USB, I2C, UART1, UART2 and selectable SPI\u003c\/li\u003e\n\u003cli\u003eDefault I2C address: 0x42, software configurable\u003c\/li\u003e\n\u003cli\u003eManufacturer-listed maximum rates: basic PVT up to 25Hz and RTK up to 20Hz, subject to firmware and receiver configuration\u003c\/li\u003e\n\u003cli\u003eManufacturer-listed horizontal accuracy: 2.5m without RTK and 0.010m with RTK under applicable test conditions\u003c\/li\u003e\n\u003cli\u003eTypical time to first fix: 25 seconds cold, 2 seconds hot\u003c\/li\u003e\n\u003cli\u003ePCB outline: approximately 1.70 x 1.70 inches, 43.18 x 43.18mm; allow extra clearance for connectors\u003c\/li\u003e\n\u003cli\u003eBoard weight: approximately 6.8g\u003c\/li\u003e\n\u003cli\u003eTwo Qwiic connectors and four mounting holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConnection and RTK Notes\u003c\/h3\u003e\u003cp\u003eUse a suitable external multi-band GNSS antenna to make use of dual-band reception. An SMA antenna needs a compatible U.FL-to-SMA cable. Mount the antenna with a clear view of the sky and follow its ground-plane requirements. Connectors, cables and antenna are separate accessories.\u003c\/p\u003e\u003cp\u003eFor RTK operation, provide suitable RTCM corrections from a base station or correction service. Service availability, coverage, account requirements and any fees are separate from this board. Do not assume centimeter accuracy without a valid RTK fix.\u003c\/p\u003e\u003cp\u003eThe DSEL jumper selects SPI in place of I2C and UART1 on their shared pins. USB and UART2 remain available as described in the hookup guide. Use 3.3V-compatible signal levels. The board is a GNSS receiver, not a complete flight controller.\u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 x SparkFun GPS-15136 GPS-RTK2 ZED-F9P Qwiic breakout board with onboard backup battery.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eGNSS antenna, U.FL-to-SMA cable, USB-C cable, Qwiic cable, headers, radio\/Bluetooth module, base station, mounting hardware and host controller are not included. No correction-service subscription or redemption code is promised with this listing. Gallery images show different views and technical details of the same one-board model.\u003c\/p\u003e\n\u003ch3\u003eUseful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/sparkfun-gps-rtk2-board-zed-f9p-qwiic-gps-15136.html\" target=\"_blank\" rel=\"noopener\"\u003eOfficial SparkFun GPS-15136 specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gps-rtk2-hookup-guide\/all\" target=\"_blank\" rel=\"noopener\"\u003eSparkFun GPS-RTK2 hookup guide and correction-data setup\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Qwiic_GPS-RTK2\" target=\"_blank\" rel=\"noopener\"\u003eSparkFun GPS-RTK2 hardware files\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SparkFun","offers":[{"title":"Default Title","offer_id":51933163126951,"sku":"IR0000312","price":33046.61,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/15136-SparkFun_GPS-RTK2_Board_-_ZED-F9P__Qwiic_-03.jpg?v=1795107028","url":"https:\/\/rees52.com\/products\/sparkfun-gps-15136-rtk2-zed-f9p-qwiic-breakout","provider":"REES52","version":"1.0","type":"link"}