{"product_id":"mk2b-3d-printer-pcb-heat-bed-214mm-red","title":"MK2B 3D Printer PCB Heat Bed - 214mm (Red)","description":"\u003cp\u003eThe MK2B is the classic dual-power PCB heat bed for RepRap, Prusa i3 and other open-frame 3D printers. It runs on 12V or 24V depending on how the three power pins are wired, and provides a 214 x 214 mm heated platform for printing PLA, ABS and other filaments. Pair it with a borosilicate glass plate clipped on top for a flat printing surface.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePCB size: 214 x 214 mm (approx. 200 x 200 mm active heated area; 209 mm mounting hole spacing)\u003c\/li\u003e\n\u003cli\u003eLaminate: FR4, 1.6 mm\u003c\/li\u003e\n\u003cli\u003eConstruction: 2-layer, 35 µm copper, red soldermask with white silkscreen on both sides\u003c\/li\u003e\n\u003cli\u003ePower input: 12V or 24V (dual power; wire the three on-board pins according to the printed pin table)\u003c\/li\u003e\n\u003cli\u003eResistance: approx. 1.0-1.2 ohm in 12V wiring; approx. 3-3.4 ohm in 24V wiring\u003c\/li\u003e\n\u003cli\u003eCurrent draw: about 10A at 12V - make sure your power supply has at least 10A spare\u003c\/li\u003e\n\u003cli\u003eOn-board LED\/resistor pads and thermistor footprint (thermistor not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x MK2B 3D Printer PCB Heat Bed - 214mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUseful Links\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/reprap.org\/wiki\/PCB_Heatbed\"\u003eRepRap Wiki: PCB Heatbed (MK2\/MK2B design files, wiring and technical details)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHot surface: the bed gets very hot in operation and stays hot after power-off. Before touching, power off the heat bed and wait at least 10 minutes.\u003c\/li\u003e\n\u003cli\u003eDo not leave the printer unattended while the bed is heating, and keep it away from children (warnings printed on the board by the designer).\u003c\/li\u003e\n\u003cli\u003eUse thick, short supply wires and secure screw-terminal connections - at 12V the bed draws about 10A.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":51936646004903,"sku":"IN000393","price":466.1,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/d1.jpg?v=1795138830","url":"https:\/\/rees52.com\/products\/mk2b-3d-printer-pcb-heat-bed-214mm-red","provider":"REES52","version":"1.0","type":"link"}