{"product_id":"inslogic-petg-cf10-carbon-fiber-3d-printer-filament-1-75mm-1kg-spool-grey","title":"INSLOGIC PETG-CF10 Carbon Fiber 3D Printer Filament 1.75mm 1kg Spool - Grey","description":"\u003ch2\u003eINSLOGIC PETG-CF10 Grey Filament, 1.75mm, 1kg\u003c\/h2\u003e\n\u003cp\u003eINSLOGIC PETG-CF10 combines a PETG base with 10% carbon fibre for FDM printing. This listing supplies one 1kg spool in Grey, with a nominal filament diameter of 1.75mm. Choose it when your project calls for the PETG-CF10 formulation rather than unfilled PETG, PETG Pro or PLA-CF. Its muted grey colour and matte surface are useful for practical models where a low-gloss finish is preferred.\u003c\/p\u003e\n\u003ch3\u003eFor functional prototypes and detailed parts\u003c\/h3\u003e\n\u003cp\u003eThe carbon fibre reinforcement is intended to improve stiffness while retaining useful toughness. INSLOGIC identifies tools, structural components and functional prototypes as applications for this material. It is a starting point for making brackets, housings, fit-check models and workshop fixtures, provided the finished design is tested for its intended conditions. A material choice alone does not establish the load capacity of a printed part.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer describes low warping and good dimensional stability. Actual results still depend on bed preparation, first-layer calibration, part orientation and the printer's extrusion system. The matte finish can make surface reflections less prominent, but it does not remove layer lines or replace good print settings.\u003c\/p\u003e\n\u003ch3\u003ePrinter setup and material care\u003c\/h3\u003e\n\u003cp\u003eUse an FDM printer that accepts 1.75mm filament and can operate at the required temperatures. INSLOGIC's current starting guidance is a 240-250°C nozzle, 50-60°C bed and 50-100mm\/s print speed, with 100% cooling fan. These are tuning references, not guaranteed settings for every machine. Begin with a suitable material profile and check extrusion, bonding and surface quality on a small test before committing to a long print.\u003c\/p\u003e\n\u003cp\u003eINSLOGIC states that PETG-CF10 is not compatible with any AMS series. Do not assume compatibility merely because a printer accepts other PETG materials. Check your feed path and printer manufacturer's instructions for reinforced filaments. The drying reference is 50-60°C for four hours. Store unused filament dry and protected from moisture, and use temperature-controlled drying equipment suitable for the spool.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand \/ formulation\u003c\/th\u003e\n\u003ctd\u003eINSLOGIC PETG-CF10, 10% carbon fibre reinforced PETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eGrey (#494D53 manufacturer colour reference)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75mm ±0.02mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNet filament weight \/ nominal length\u003c\/th\u003e\n\u003ctd\u003e1kg \/ 330m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle \/ bed temperature\u003c\/th\u003e\n\u003ctd\u003e240-250°C \/ 50-60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStarting print speed \/ fan\u003c\/th\u003e\n\u003ctd\u003e50-100mm\/s \/ 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrying reference\u003c\/th\u003e\n\u003ctd\u003e50-60°C for 4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTensile strength \/ elongation at break\u003c\/th\u003e\n\u003ctd\u003e36.7MPa \/ 35%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural strength \/ modulus\u003c\/th\u003e\n\u003ctd\u003e58MPa \/ 2835MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeat deflection temperature\u003c\/th\u003e\n\u003ctd\u003e73.5°C at 0.45MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAMS compatibility\u003c\/th\u003e\n\u003ctd\u003eNot compatible with any AMS series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\u003ctd\u003e1 x 1kg Grey PETG-CF10 filament spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eUse notes\u003c\/h3\u003e\n\u003cp\u003eMechanical and thermal figures are manufacturer laboratory references. Printed properties vary with geometry, orientation, settings and temperature. The heat-deflection figure is not a continuous-use temperature rating. Manufacturer application images illustrate the material family; shown printed objects, equipment and accessories are not included and may use another colour. Printed examples are not certification for protective or safety-critical use.\u003c\/p\u003e","brand":"INSLOGIC","offers":[{"title":"Default Title","offer_id":51900684533927,"sku":"IR0000253","price":1440.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/InslogicPETG-CF10Functional3DPrinterFilament_Grey.jpg?v=1794831149","url":"https:\/\/rees52.com\/products\/inslogic-petg-cf10-carbon-fiber-3d-printer-filament-1-75mm-1kg-spool-grey","provider":"REES52","version":"1.0","type":"link"}