{"product_id":"inslogic-pa6-cf-carbon-fiber-nylon-3d-printer-filament-1-75mm-1kg-spool-black","title":"INSLOGIC PA6-CF Carbon Fiber Nylon 3D Printer Filament 1.75mm 1kg Spool - Black","description":"\u003ch2\u003eINSLOGIC PA6-CF Black Filament, 1.75mm, 1kg\u003c\/h2\u003e\n\u003cp\u003eINSLOGIC PA6-CF is a Nylon 6 copolymer filament reinforced with 20% high-modulus carbon fibre. This listing supplies one 1kg spool of Black 1.75mm filament. It is PA6-CF, not PA12-CF, glass-filled PA6 or a nylon-like liquid resin. The material is intended for experienced FDM users who can control drying, printer temperature and the handling of abrasive engineering filaments.\u003c\/p\u003e\n\u003ch3\u003eFor stiff functional prototypes and tooling\u003c\/h3\u003e\n\u003cp\u003eThe carbon-fibre reinforcement increases stiffness and helps the printed material retain its dimensions. INSLOGIC positions PA6-CF for fixtures, clamps, manufacturing aids and mechanical prototypes where a plain PLA print may not meet the project's needs. The dark, textured finish can make layer lines less obvious. Select orientation, wall count and infill for the job, then test the actual printed part before putting it into service.\u003c\/p\u003e\n\u003cp\u003eManufacturer laboratory references include 172MPa tensile strength, 254MPa flexural strength and a 209°C heat-deflection temperature at 0.45MPa. These are material test results, not a guarantee that every printed shape can carry a particular load or operate continuously at that temperature. Avoid treating example automotive parts or other gallery models as safety approvals. The photographs illustrate the PA6-CF family and possible prints; manifolds, gears, tools and finished objects are not supplied.\u003c\/p\u003e\n\u003ch3\u003ePrinter requirements and moisture care\u003c\/h3\u003e\n\u003cp\u003eUse a hardened-steel nozzle with a 0.4mm or 0.6mm diameter. Carbon-fibre-filled filament is abrasive, so a standard brass nozzle is not the recommended choice. INSLOGIC lists a 270-290°C nozzle temperature at 50-100mm\/s, a 50-70°C bed, textured PEI surface and 30% cooling fan as starting references. The printer and hotend must support those temperatures. The manufacturer marks this material as not compatible with any AMS series.\u003c\/p\u003e\n\u003cp\u003ePA6-CF attracts moisture and needs dry handling before and during printing. The manufacturer's drying references are 90°C for 12 hours or 110°C for four hours. Use equipment and a spool rated for the selected temperature; do not improvise with an uncontrolled heat source. Keep unused material sealed with desiccant. INSLOGIC recommends a heated chamber and suitable build-plate adhesive to help limit curling and warping. Clean the build plate after removing the print.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand \/ material\u003c\/th\u003e\n\u003ctd\u003eINSLOGIC PA6-CF, Nylon 6 copolymer with 20% carbon fibre\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour \/ net weight\u003c\/th\u003e\n\u003ctd\u003eBlack \/ 1kg filament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75mm ±0.03mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNominal length \/ density\u003c\/th\u003e\n\u003ctd\u003e358m \/ 1.2g\/cm³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle\u003c\/th\u003e\n\u003ctd\u003eHardened steel, 0.4mm or 0.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNozzle \/ bed temperature\u003c\/th\u003e\n\u003ctd\u003e270-290°C \/ 50-70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePrinting speed reference\u003c\/th\u003e\n\u003ctd\u003e50-100mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFlexural modulus\u003c\/th\u003e\n\u003ctd\u003e10202MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eElongation at break \/ hardness\u003c\/th\u003e\n\u003ctd\u003e10.1% \/ 84 Shore D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackage contents\u003c\/th\u003e\n\u003ctd\u003e1 x 1kg Black PA6-CF filament spool\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch3\u003eUse notes\u003c\/h3\u003e\n\u003cp\u003eFine-tune settings for your machine and geometry. Printed properties depend on orientation, moisture, processing and temperature. Provide suitable ventilation, avoid breathing printing fumes or sanding dust, and keep hands clear of hot printer parts. Validate any component exposed to sustained force, heat or chemicals before use.\u003c\/p\u003e","brand":"INSLOGIC","offers":[{"title":"Default Title","offer_id":51900923969703,"sku":"IR0000261","price":3601.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/Inslogic-PA6-CF-Filament-1KG-packaging.jpg?v=1794835710","url":"https:\/\/rees52.com\/products\/inslogic-pa6-cf-carbon-fiber-nylon-3d-printer-filament-1-75mm-1kg-spool-black","provider":"REES52","version":"1.0","type":"link"}