{"product_id":"holybro-m9n-standard-10-pin-gps-compass-module","title":"Holybro M9N Standard 10-Pin GPS Compass Module with Carbon-Fiber Mount","description":"\u003cp\u003eThe Holybro M9N Standard GPS combines a u-blox M9N multi-constellation GNSS receiver with an IST8310 compass, RGB status light, buzzer and safety switch. It connects to a compatible Pixhawk-standard GPS1 port through its ten-pin cable and includes a fixed carbon-fiber mounting set.\u003c\/p\u003e\n\u003cp\u003eThis listing is the original-style standard ten-pin M9N version with safety switch and buzzer, not the six-pin secondary GPS, the older Pix32 split-cable option, or the newer IP67 V2. Match the connector and firmware to your flight controller before ordering. The module is not an RTK receiver.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eu-blox M9N GNSS receiver supporting concurrent GPS, Galileo, GLONASS and BeiDou reception.\u003c\/li\u003e\n\u003cli\u003eIntegrated IST8310 magnetic compass.\u003c\/li\u003e\n\u003cli\u003e25 x 25 x 4mm ceramic patch antenna.\u003c\/li\u003e\n\u003cli\u003eTri-color status light, buzzer and physical safety switch.\u003c\/li\u003e\n\u003cli\u003eStandard ten-pin connection for a compatible GPS1 input.\u003c\/li\u003e\n\u003cli\u003eFixed carbon-fiber GPS mount set included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: Holybro M9N Standard GPS\u003c\/li\u003e\n\u003cli\u003eConnector option: standard JST-GH ten-pin, maker option 12027\u003c\/li\u003e\n\u003cli\u003eReceiver: u-blox M9N\u003c\/li\u003e\n\u003cli\u003eCompass: IST8310\u003c\/li\u003e\n\u003cli\u003eSupported output protocols: UBX and NMEA\u003c\/li\u003e\n\u003cli\u003eSerial baud rate: 115200bps\u003c\/li\u003e\n\u003cli\u003eSupplier-listed default update rate: 5Hz; configuration and firmware affect actual output\u003c\/li\u003e\n\u003cli\u003eManufacturer-listed horizontal accuracy: 1.5m CEP, subject to reception conditions\u003c\/li\u003e\n\u003cli\u003eInput voltage: 4.7-5.2V DC\u003c\/li\u003e\n\u003cli\u003eAntenna: 25 x 25 x 4mm ceramic patch\u003c\/li\u003e\n\u003cli\u003eOriginal-style enclosure size: approximately 50mm diameter x 14.4mm\u003c\/li\u003e\n\u003cli\u003eModule and cable weight: approximately 32g, excluding mounting set\u003c\/li\u003e\n\u003cli\u003eAttached cable: approximately 26-27cm\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 to 80 degrees C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConnection and Installation\u003c\/h3\u003e\u003cp\u003eUse a compatible ten-pin GPS1 port and check the official pin map before connecting. This is not the six-pin GPS2 version. The GPS serial connection, compass bus, safety switch, buzzer and status signals depend on correct controller wiring and firmware support. Follow the controller's GPS setup and compass-calibration instructions rather than assuming the unit is ready to fly after plugging it in.\u003c\/p\u003e\u003cp\u003eInstall the antenna with a clear view of the sky, away from power wiring and RF interference. Keep the compass away from magnetic materials and calibrate it after installation. This original-style version is not advertised here as waterproof or IP67. The weighing scale shown in one gallery photo is for illustration and is not included.\u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x Holybro M9N GPS module with standard ten-pin cable.\u003c\/li\u003e\n\u003cli\u003e1 x fixed carbon-fiber GPS mounting set with its supplied mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo flight controller, aircraft, battery, RTK correction equipment or weighing scale is included. A six-pin secondary-GPS cable and a split Pix32 cable are not included. The first image shows the GPS and the supplied mounting set.\u003c\/p\u003e\n\u003ch3\u003eUseful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/holybro.com\/products\/m9n-gps\" target=\"_blank\" rel=\"noopener\"\u003eOfficial Holybro M9N GPS specifications and connector options\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.holybro.com\/gps-and-rtk-system\/m8n-m9n-m10-gps\/standard-m10-m9n-m8n-gps\/overview\" target=\"_blank\" rel=\"noopener\"\u003eHolybro standard GPS documentation and V1\/V2 differences\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0604\/5905\/7341\/files\/M9N_pinout.jpg\" target=\"_blank\" rel=\"noopener\"\u003eOfficial M9N connector pin-map comparison, use the standard ten-pin diagram\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Holybro","offers":[{"title":"Default Title","offer_id":51933499031719,"sku":"IR0000317","price":7719.49,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/12027-2_4aacf18b-e239-4d2f-bc64-5f1108632c7d.jpg?v=1795110863","url":"https:\/\/rees52.com\/products\/holybro-m9n-standard-10-pin-gps-compass-module","provider":"REES52","version":"1.0","type":"link"}