{"product_id":"hglrc-elrs-2-4ghz-rx-t-nano-receiver","title":"HGLRC ELRS 2.4GHz RX-T Nano Receiver with T Antennas","description":"\u003cp\u003eThe HGLRC ELRS 2.4G RX-T is a compact ExpressLRS receiver for compatible FPV drone and RC-aircraft control systems. The board has a detachable antenna connection, a plug-in cable connector and solder pads, so it can fit different installation layouts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCheck radio compatibility:\u003c\/strong\u003e This receiver needs a compatible 2.4GHz ExpressLRS transmitter and matching firmware setup. It is not a 915MHz receiver and does not bind directly to FrSky ACCST, FlySky AFHDS or a RadioMaster 4-in-1 module without a suitable ExpressLRS transmitter module.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCompact HGLRC ELRS 2.4G RX-T receiver board.\u003c\/li\u003e\n\u003cli\u003ePlug-in cable connector and G\/V\/T\/R solder pads.\u003c\/li\u003e\n\u003cli\u003eDetachable T antenna connection.\u003c\/li\u003e\n\u003cli\u003eWi-Fi firmware configuration supported by the ExpressLRS system.\u003c\/li\u003e\n\u003cli\u003eTwo T antennas and a four-wire connection cable in the illustrated manufacturer package.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: HGLRC ELRS 2.4G Receiver, RX-T\u003c\/li\u003e\n\u003cli\u003eRadio system: 2.4GHz ExpressLRS\u003c\/li\u003e\n\u003cli\u003eSupply: regulated 5V\u003c\/li\u003e\n\u003cli\u003eConnection: serial transmitter\/receiver signal pads or plug-in cable, with power and ground\u003c\/li\u003e\n\u003cli\u003eBoard size: approximately 11.18 x 12.45mm\u003c\/li\u003e\n\u003cli\u003eBare-board weight: approximately 0.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSetup Notes\u003c\/h3\u003e\u003cp\u003eConnect the receiver only after checking its pad labels and the flight controller's wiring diagram. A matching plug is not proof that the pin order is correct. Receiver T\/TX goes to the controller's RX, receiver R\/RX goes to the controller's TX, and power and ground must match the controller's supported regulated supply.\u003c\/p\u003e\u003cp\u003eMatch the ExpressLRS firmware major version, regulatory domain and binding settings on the transmitter and receiver. Check the installed receiver firmware and exact hardware target before updating it. HGLRC's product illustration references ExpressLRS 3.0, but check the firmware actually installed on the supplied unit. Do not select a generic or different receiver target by appearance alone.\u003c\/p\u003e\u003cp\u003eKeep the antenna clear of carbon fibre and high-current wiring, secure the receiver and cable, and complete a failsafe and range check before flight. Radio range depends on installation, antennas, power settings and surroundings. Use settings permitted in your location.\u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x HGLRC ELRS 2.4G RX-T receiver.\u003c\/li\u003e\n\u003cli\u003e2 x T antennas.\u003c\/li\u003e\n\u003cli\u003e1 x Four-wire connection cable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePackage quantities follow the matching supplier gallery and HGLRC packing illustration. Radio transmitter, flight controller, drone frame, motors, ESC, battery and other installation electronics are not included.\u003c\/p\u003e\n\u003ch3\u003eUseful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.hglrc.com\/products\/hglrc-elrs-2-4g-receiver\" target=\"_blank\" rel=\"noopener\"\u003eOfficial HGLRC ELRS 2.4G receiver information\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2672\/8290\/files\/HGLRC-elrs_64d53552-036f-4569-b66b-7a21be49f17b.jpg?v=1747211394\" target=\"_blank\" rel=\"noopener\"\u003eHGLRC product, wiring and packing illustrations\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.expresslrs.org\/quick-start\/getting-started\/\" target=\"_blank\" rel=\"noopener\"\u003eOfficial ExpressLRS getting-started guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.expresslrs.org\/quick-start\/receivers\/updating\/\" target=\"_blank\" rel=\"noopener\"\u003eOfficial receiver firmware update guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HGLRC","offers":[{"title":"Default Title","offer_id":51932744056999,"sku":"IR0000307","price":1386.44,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/c2831abc7349d543adb0b881462785d1_2b3038f3-3ed0-42fb-8803-06daf770f57d.jpg?v=1795102096","url":"https:\/\/rees52.com\/products\/hglrc-elrs-2-4ghz-rx-t-nano-receiver","provider":"REES52","version":"1.0","type":"link"}