{"product_id":"dfrobot-sen0568-fermion-mems-h2s-sensor","title":"DFRobot Fermion SEN0568 MEMS Hydrogen Sulfide H2S Gas Response Sensor","description":"\u003ch2\u003eDFRobot Fermion SEN0568 MEMS H2S Sensor\u003c\/h2\u003e\u003cp\u003eA small analog-output breakout for experiments that monitor a response to hydrogen sulfide (H2S). It connects to a compatible microcontroller ADC and is intended for qualitative gas-response work, not calibrated concentration measurements.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e DFRobot says not to use this module in systems involving personal safety. It is not a certified H2S alarm, exposure monitor, confined-space entry instrument or safety interlock. Do not use it to decide whether air is safe to breathe. The maker also lists sensitivity to benzene and other gases, so a response does not uniquely identify H2S.\u003c\/p\u003e\u003ch3\u003eFeatures and specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDFRobot Fermion SEN0568\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTarget gas\u003c\/th\u003e\n\u003ctd\u003eHydrogen sulfide (H2S); cross-sensitive to other gases\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput\u003c\/th\u003e\n\u003ctd\u003eQualitative response, analog voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaker's detection range\u003c\/th\u003e\n\u003ctd\u003e0.5–50 ppm; not a calibrated concentration reading\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupply\u003c\/th\u003e\n\u003ctd\u003e3.3–5 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating current\u003c\/th\u003e\n\u003ctd\u003eLess than 20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensitivity\u003c\/th\u003e\n\u003ctd\u003eR0 in air \/ Rs in 50 ppm H2S ≥ 3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLoad resistance\u003c\/th\u003e\n\u003ctd\u003e4.7 kΩ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConnections\u003c\/th\u003e\n\u003ctd\u003eA: analog output; VCC: supply; GND: ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating conditions\u003c\/th\u003e\n\u003ctd\u003e−10 to 50 °C; 15–90% RH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoard dimensions\u003c\/th\u003e\n\u003ctd\u003e13 × 13 × 2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eUse and handling\u003c\/h3\u003e\u003cp\u003eRemove the protective film before use. Check the controller ADC voltage limit before connecting the analog output. The official Arduino example reads raw analog values; it does not convert them into calibrated ppm. Allow more than five minutes of warm-up on first power-up, and more than 24 hours after prolonged storage.\u003c\/p\u003e\u003cp\u003eAvoid silicone vapours, concentrated corrosive gases, alkalis, halogens, water, condensation, freezing and strong impacts. Do not leave the sensor in prolonged hot, humid or heavily polluted conditions.\u003c\/p\u003e\u003ch3\u003ePackage Includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × DFRobot Fermion SEN0568 H2S sensor breakout\u003c\/li\u003e\n\u003cli\u003e1 × separate 2.54 mm pitch pin header\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe header is supplied separately and needs soldering. Controller, wires and power supply are not included.\u003c\/p\u003e\u003ch3\u003eUseful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/product-2702.html\"\u003eOfficial DFRobot specifications and precautions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/sen0568\/\"\u003eSEN0568 pinout and reference guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/sen0568\/docs\/18005\"\u003eArduino raw analog reading example and wiring\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":51936234897575,"sku":"IN000381","price":808.47,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/SEN0568_Main_01.jpg?v=1795128851","url":"https:\/\/rees52.com\/products\/dfrobot-sen0568-fermion-mems-h2s-sensor","provider":"REES52","version":"1.0","type":"link"}