{"product_id":"dfrobot-gravity-sen0514-ens160-air-quality-sensor","title":"DFRobot Gravity SEN0514 ENS160 I2C Air Quality Sensor TVOC eCO2 AQI","description":"\u003ch2\u003eDFRobot Gravity SEN0514 ENS160 Air Quality Sensor\u003c\/h2\u003e\u003cp\u003eA compact I2C module for indoor air-quality projects. The ENS160 metal-oxide multi-gas chip processes its gas response into total volatile organic compounds (TVOC), an equivalent carbon dioxide value (eCO2) and a five-level air quality index (AQI). The Gravity four-pin connector makes it easy to wire to a compatible controller.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKnow what the readings mean:\u003c\/strong\u003e eCO2 is an estimate calculated from the response to VOCs and hydrogen. It is not a direct CO2 measurement and this module is not an NDIR CO2 sensor. Use it for air-quality trends and experiments, not as a substitute for a dedicated gas alarm or a safety assessment. Temperature and humidity compensation values must be supplied by your program; the module does not provide temperature or humidity measurements.\u003c\/p\u003e\u003ch3\u003eFeatures and specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eDFRobot Gravity SEN0514\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSensor chip\u003c\/th\u003e\n\u003ctd\u003eScioSense ENS160, metal-oxide multi-gas sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutputs\u003c\/th\u003e\n\u003ctd\u003eTVOC, calculated eCO2, AQI and operating status\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSupply\u003c\/th\u003e\n\u003ctd\u003e3.3–5.5 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking current\u003c\/th\u003e\n\u003ctd\u003e29 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInterface\u003c\/th\u003e\n\u003ctd\u003eI2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eI2C address\u003c\/th\u003e\n\u003ctd\u003e0x52 or 0x53, selected on the board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTVOC output range\u003c\/th\u003e\n\u003ctd\u003e0–65000 ppb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eeCO2 output range\u003c\/th\u003e\n\u003ctd\u003e400–65000 ppm, calculated equivalent value\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAQI output\u003c\/th\u003e\n\u003ctd\u003eFive levels, 1 to 5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e−40 to 85 °C, maker specification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating humidity\u003c\/th\u003e\n\u003ctd\u003e5–95% RH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBoard size\u003c\/th\u003e\n\u003ctd\u003e30 × 22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting holes\u003c\/th\u003e\n\u003ctd\u003e15 mm pitch, 3 mm aperture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eConnection and first use\u003c\/h3\u003e\u003cp\u003eConnect + to a suitable supply, − to ground, C to I2C SCL and D to I2C SDA. Check your controller's electrical limits and the selected address before powering up. The official Arduino example uses address 0x53 and the DFRobot_ENS160 library. The Gravity SEN0514 board uses I2C; the library's SPI examples for the separate Fermion version do not add an SPI interface to this board.\u003c\/p\u003e\u003cp\u003eRead the sensor status before using the outputs. Normal power-on warm-up is about three minutes. Initial start-up lasts the first full hour of operation; the completion state is stored after 24 hours of continuous operation, so an earlier power interruption can cause initial start-up to resume. Supply current ambient temperature and relative humidity to the library's compensation function rather than assuming its example values match your room.\u003c\/p\u003e\u003cp\u003eThe onboard algorithm includes automatic baseline correction. Common projects include indoor air-quality logging, ventilation experiments and home-automation prototypes. Output ranges are not accuracy guarantees.\u003c\/p\u003e\u003ch3\u003ePackage Includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × DFRobot Gravity SEN0514 ENS160 air quality sensor board\u003c\/li\u003e\n\u003cli\u003e1 × Gravity four-pin I2C\/UART sensor connector cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eController, power supply and other accessories are not included. The supplied cable's I2C\/UART name does not mean the SEN0514 supports UART.\u003c\/p\u003e\u003ch3\u003eUseful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/product-2526.html\"\u003eOfficial DFRobot product specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/sen0514\/\"\u003eSEN0514 pinout and overview\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/sen0514\/docs\/20296\"\u003eArduino wiring, setup and status handling\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/sen0514\/docs\/20295\"\u003eRaspberry Pi example\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/wiki.dfrobot.com\/sen0514\/docs\/20294\"\u003eLibrary API and eCO2 calculation notes\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":51936382615719,"sku":"IN000383","price":1753.39,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/SEN0514_Main_01.jpg?v=1795130247","url":"https:\/\/rees52.com\/products\/dfrobot-gravity-sen0514-ens160-air-quality-sensor","provider":"REES52","version":"1.0","type":"link"}