{"product_id":"dfrobot-fit0798-m2-a-e-key-gigabit-ethernet-module","title":"DFRobot FIT0798 M.2 A+E Key Gigabit Ethernet Module for LattePanda Alpha Delta","description":"\u003ch2\u003eDFRobot FIT0798 M.2 A+E Key Gigabit Ethernet Module\u003c\/h2\u003e\u003cp\u003eAdd a wired RJ45 network connection to a compatible LattePanda Alpha or Delta through its M.2 A+E Key interface. The FIT0798 uses a Realtek RTL8111F controller and supports automatic negotiation at 10, 100 or 1000 Mbps. The assembly has an M.2 card connected by a ribbon cable to a separate RJ45 connector board, allowing the network socket to be positioned away from the host slot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatibility check:\u003c\/strong\u003e Confirm that the host has the correct, electrically compatible M.2 A+E Key slot, available space and support for the RTL8111F controller. A matching-looking M.2 storage slot is not enough. This is the Gigabit FIT0798 model, not a B+M Key 2.5G or 5G Ethernet card. DFRobot's 2.5 Gb\/s host-interface figure does not mean the RJ45 port supports 2.5GbE: the network port is rated up to 1000 Mbps.\u003c\/p\u003e\u003ch3\u003eFeatures and specifications\u003c\/h3\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMaker model\u003c\/th\u003e\n\u003ctd\u003eDFRobot FIT0798\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHost interface\u003c\/th\u003e\n\u003ctd\u003eNGFF \/ M.2 A+E Key\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eEthernet controller\u003c\/th\u003e\n\u003ctd\u003eRealtek RTL8111F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNetwork connection\u003c\/th\u003e\n\u003ctd\u003eOne RJ45 port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNetwork link rates\u003c\/th\u003e\n\u003ctd\u003e10 \/ 100 \/ 1000 Mbps, auto-negotiated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNamed host boards\u003c\/th\u003e\n\u003ctd\u003eLattePanda Alpha and Delta\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating systems listed by maker\u003c\/th\u003e\n\u003ctd\u003eWindows 32\/64-bit, Linux, FreeBSD and VMware ESXi; verify the driver for the intended version\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating temperature\u003c\/th\u003e\n\u003ctd\u003e0 to 55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOperating humidity\u003c\/th\u003e\n\u003ctd\u003e10–90% RH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower consumption\u003c\/th\u003e\n\u003ctd\u003e1.2 W, maker specification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation and first use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eShut down the host and disconnect its power before fitting the card. Check the slot keying, clearance and ribbon-cable routing.\u003c\/li\u003e\n\u003cli\u003eFit and secure the M.2 card using the host's appropriate mounting point, and mount the RJ45 connector board without straining the ribbon cable.\u003c\/li\u003e\n\u003cli\u003eReconnect power, start the system and check that the RTL8111F network controller is detected. Confirm driver availability for the exact operating-system release before relying on it.\u003c\/li\u003e\n\u003cli\u003eConnect a suitable Ethernet cable to a router or switch. Check the negotiated link rate in the operating system.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eThe link rate depends on the network cable, router or switch port and the other equipment in the connection. A 1000 Mbps link is not a promise of that application transfer speed or internet speed. General operating-system support does not guarantee that every version includes a working driver.\u003c\/p\u003e\u003ch3\u003ePackage Includes\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1 × DFRobot FIT0798 M.2 A+E Key to Gigabit Ethernet module assembly, with ribbon-connected RJ45 board\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eLattePanda or other host computer, power supply, network cable and router\/switch are not included. The product photos show the module assembly, not a complete computer.\u003c\/p\u003e\u003ch3\u003eUseful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.dfrobot.com\/product-2318.html\"\u003eOfficial FIT0798 specifications, compatibility and package\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.newark.com\/dfrobot\/fit0798\/ethernet-module-m-2-gigabit-rj45\/dp\/03AM7901\"\u003eFIT0798 part identification and specifications at Newark\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":51936440221863,"sku":"IN000387","price":1863.56,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/FIT0798_Main_01.jpg?v=1795132174","url":"https:\/\/rees52.com\/products\/dfrobot-fit0798-m2-a-e-key-gigabit-ethernet-module","provider":"REES52","version":"1.0","type":"link"}