{"product_id":"cuav-neo-3-pro-m9n-dronecan-gnss-module","title":"CUAV NEO 3 Pro M9N DroneCAN GNSS Module with Stand and Cable","description":"\u003cp\u003eThe CUAV NEO 3 Pro combines a u-blox NEO-M9N GNSS receiver with a DroneCAN interface, RM3100 magnetic compass, barometer, RGB status light, buzzer and physical safety switch. It receives GPS, GLONASS, BeiDou and Galileo concurrently and is designed for compatible autopilot systems.\u003c\/p\u003e\n\u003cp\u003eThis listing includes one NEO 3 Pro module with its stand and connection cable. This is the CAN\/DroneCAN NEO 3 Pro, not the UART NEO 3, NEO 3X or NEO 4. It is a standalone GNSS navigation module, not a centimeter-level RTK receiver.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eu-blox NEO-M9N receiver with simultaneous reception from four GNSS constellations.\u003c\/li\u003e\n\u003cli\u003eDroneCAN communication for a compatible flight-controller CAN port.\u003c\/li\u003e\n\u003cli\u003eIntegrated RM3100 magnetic compass and barometer.\u003c\/li\u003e\n\u003cli\u003eRGB status light, passive buzzer and physical safety button.\u003c\/li\u003e\n\u003cli\u003eSTM32F412 processor and firmware-update support.\u003c\/li\u003e\n\u003cli\u003eSAW + LNA + SAW RF filtering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: CUAV NEO 3 Pro\u003c\/li\u003e\n\u003cli\u003eGNSS receiver: u-blox NEO-M9N\u003c\/li\u003e\n\u003cli\u003eProcessor: STM32F412, 32-bit Arm Cortex-M4\u003c\/li\u003e\n\u003cli\u003eCompass: RM3100\u003c\/li\u003e\n\u003cli\u003eGNSS: GPS L1C\/A, GLONASS L1OF, BeiDou B1I and Galileo E1B\/C\u003c\/li\u003e\n\u003cli\u003eAugmentation: SBAS and QZSS, subject to configuration and regional availability\u003c\/li\u003e\n\u003cli\u003eManufacturer-listed nominal horizontal accuracy: 2.0m; best measured 0.7m is not a guaranteed operating accuracy\u003c\/li\u003e\n\u003cli\u003eSpeed accuracy: 0.05m\/s\u003c\/li\u003e\n\u003cli\u003eNavigation update rate: up to 25Hz\u003c\/li\u003e\n\u003cli\u003eProtocol: DroneCAN\u003c\/li\u003e\n\u003cli\u003eModule connector: GHR-04V-S\u003c\/li\u003e\n\u003cli\u003eInput voltage: 4.7-5.2V\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -10 to 70 degrees C\u003c\/li\u003e\n\u003cli\u003eModule size: 60 x 60 x 16mm\u003c\/li\u003e\n\u003cli\u003eModule weight: 33g, excluding stand and cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConnection Notes\u003c\/h3\u003e\u003cp\u003eUse the CUAV NEO 3 Pro pinout and a compatible CAN connector. Do not connect it as though it were a generic UART GPS module. CUAV lists ArduPilot 4.0 or later and PX4 1.13.0 or later in its connection guide; verify current firmware, controller support and parameters for the actual installation. A controller's CAN port does not by itself guarantee plug-and-play operation.\u003c\/p\u003e\u003cp\u003eMount the GNSS unit with a clear sky view, away from high-current wiring and strong magnetic or RF interference. Follow the maker's orientation and compass-calibration procedure. Satellite visibility and installation affect positioning performance. The exact barometer component may vary across documented revisions, so no specific barometer IC is promised.\u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x CUAV NEO 3 Pro GNSS CAN module.\u003c\/li\u003e\n\u003cli\u003e1 x mounting stand.\u003c\/li\u003e\n\u003cli\u003e1 x connection cable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo flight controller, aircraft, battery or RTK correction equipment is included. The first image shows the module assembled with its stand and cable. Internal-component and dimension images explain the module, not extra included boards or accessories.\u003c\/p\u003e\n\u003ch3\u003eUseful Links\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.cuav.net\/en\/neo-3-pro-en\/\" target=\"_blank\" rel=\"noopener\"\u003eOfficial CUAV NEO 3 Pro specifications\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/doc.cuav.net\/gps\/neo-series-gnss\/en\/neo-3-pro.html\" target=\"_blank\" rel=\"noopener\"\u003eCUAV NEO 3 Pro documentation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/store.cuav.net\/neo-3-pro-gnss-module-complete-hardware-connection-guide\/\" target=\"_blank\" rel=\"noopener\"\u003eNEO 3 Pro hardware connection and setup guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":51933333225639,"sku":"IR0000315","price":16846.61,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0618\/9042\/9095\/files\/neo-3-pro-04.webp?v=1795109173","url":"https:\/\/rees52.com\/products\/cuav-neo-3-pro-m9n-dronecan-gnss-module","provider":"REES52","version":"1.0","type":"link"}