Warning: Last items in stock!
By buying this product you can collect up to 24 loyalty points. Your cart will total 24 loyalty points that can be converted into a voucher of Rs 24.
Support Raspberry Pi model A, B, A+, B+, Zero, 2, 3 with its' L80-39 GPS chip inside.
Communicates satellite with UART or USB.
CP2102 as USB to UART Bridge chip, stable and faster.
The L80-39 with 66 search channels and 22 simultaneous tracking channels,it acquires and tracks satellites in the shortest time at Outdoor.
PPS output can be used to coordinate time with satellite.
Internal patch antenna which works quite well when used outdoors SMA connector for external active antenna for when used indoors
Fix status LED blinks to let you know when the GPS has determined the current coordinates
EASY™, advanced AGPS technology without external memory
Support time service application which can be achieved by PPS sync NMEA feature
Built-in LNA for better sensitivity
1x8 male headers, USB micro Interface
includes CP2102 Module Serial Converter USB 2.0 To TTL UART
|Raspberry Pi 3 Model B Plus||√|
|Raspberry Pi zero||√|
|Raspberry Pi zero W||√|
|Raspberry Pi 3 Model B||√|
|Raspberry Pi 2 Model B||√|
|Raspberry Pi Model B+||√|
|Satellites||66 acquisition channels,|
22 tracking channels
|Maximum Current||100mA MAX|
|Patch Antenna Size||15.0 x 15.0 x 4.0mm|
|Position Accuracy||<2.5M CEP|
|Warm/cold start without ESEY||<35s|
|Warm/cold start with ESEY||<15s|
|Update rate||1Hz (Default)|
up to 5Hz
|Baud Rate||4800~115200 bps|
|Mount Cable||1*8 Stacking Header|
USB micro data cable
Because of the Serial port issue of Raspberry Pi 3, Model B, it may cause unexpected problem, we suggest that you do not connect GPS module with Raspberry Pi directly with GPIO Pins.
1.You need a USB-to-TTL cable to connect GPS module and Raspberry Pi ,and you can wire it up like this chart:
|GPS module||Wire color|
1. After power on and login to system. you can open a terminal and typing following command to install packages for GPS module.
sudo apt-get update && sudo apt-get -y install gpsd gpsd-clients python-gps
2.Reboot your Raspberry Pi and login, also typing command in your terminal, it will help you reconfigure your gpsd service:
sudo dpkg-reconfigure gpsd
3. Start the gpsd service:
sudo gpsd /dev/ttyUSB0 -F /var/run/gpsd.sock
4.you can stop the gpsd service:
sudo killall gpsd
5.You can also use systemctl command to manage this service,but at the first, you should modify the configuration file of gpsd in /etc/default/gpsd,
filling the blank with your device name and socket name and path.
sudo systemctl enable gpsd.sock
sudo systemctl start gpsd.sock
sudo systemctl stop gpsd.sock
sudo systemctl disable gpsd.sock
Finally, use this command to get information from GPS module.
sudo cgps -s
You will see this:
If you can not get the information mentioned before. You can use this command to check if serial is working properly.
cat /dev/ttyUSB0 it works fine if you see this picture:
No customer reviews for the moment.
3 products in category: