BMP180 Digital Barometric Pressure Sensor Board Module For arduino- SR020

0 Review(s)

Rs 150

SR020

New product

  • Vin: 2.0 to 5VDC
  • Logic: 1.8V / 3.3V compliant
  • Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
  • Up to 0.03hPa / 0.25m resolution
  • -40 to +85°C operational range, +-2°C temperature accuracy
  • This board/chip uses I2C 7-bit address 0x77.

More details

By buying this product you can collect up to 1 loyalty point. Your cart will total 1 loyalty point that can be converted into a voucher of Rs 1.


Description

  • The BMP180 is the function compatible successor of the BMP085.
  • A new generation of high precision digital pressure sensors for consumer applications.
  • The ultra-low power, low voltage electronics of the BMP180 is optimized for use in mobile phones, PDAs, GPS navigation devices and outdoor equipment.
  • This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature.
  • Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, and pull-up resistors on the I2C pins.
  • The BMP180 is the next-generation of sensors from Bosch, and replaces the BMP085.
  • The good news is that it is completely identical to the BMP085 in terms of firmware/software/interfacing – you can use any example code/libraries for BMP085 as a drop-in replacement.

Documents and Downloads

No customer reviews for the moment.

Write a review

BMP180 Digital Barometric Pressure Sensor Board Module For arduino- SR020

BMP180 Digital Barometric Pressure Sensor Board Module For arduino- SR020

  • Vin: 2.0 to 5VDC
  • Logic: 1.8V / 3.3V compliant
  • Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
  • Up to 0.03hPa / 0.25m resolution
  • -40 to +85°C operational range, +-2°C temperature accuracy
  • This board/chip uses I2C 7-bit address 0x77.

30 products in category:

In stock

35mm Piezo Disc - RS131
Rs 15
0 Review(s)
Compare